[1] Oyinlola MA, Shire G, Moss RW. Thermal analysis of a solar collector absorber plate with microchannels. Experimental Thermal and Fluid Science. 2015;67:102-9.
[2] Moravej M, Bozorg MV, Guan Y, Li LK, Doranehgard MH, Hong K, et al. Enhancing the efficiency of a symmetric flat-plate solar collector via the use of rutile TiO2-water nanofluids. Sustainable Energy Technologies and Assessments. 2020;40:100783.
[3] Dutta Gupta, K.K, Saha, S, Energy Analysis of Solar Thermal Collectors, Renewable energy and environment. 1990,33(1):283-287.
[4] Shojaeizadeh E, Veysi F, Yousefi T, Davodi F. An experimental investigation on the efficiency of a Flat-plate solar collector with binary working fluid: A case study of propylene glycol (PG)–water. Experimental Thermal and Fluid Science. 2014;53:218-26.
[5] Allouhi A, Amine MB. Heat pipe flat plate solar collectors operating with nanofluids. Solar energy materials and solar cells. 2021;219:110798.
[6] Montoya-Marquez O, Flores-Prieto JJ. The effect of the angle of inclination on the efficiency in a medium-temperature flat plate solar collector. Energies. 2017;10(1):71.
[7] Broekaert S, De Cuyper T, De Paepe M, Verhelst S. Evaluation of empirical heat transfer models for HCCI combustion in a CFR engine. Applied Energy. 2017;205:1141-50.
[8] Kang W, Shin Y, Cho H. Economic analysis of flat-plate and U-tube solar collectors using an Al2O3 nanofluid. Energies. 2017;10(11):1911.
[9] García-Guendulain JM, Riesco-Avila JM, Elizalde-Blancas F, Belman-Flores JM, Serrano-Arellano J. Numerical study on the effect of distribution plates in the manifolds on the flow distribution and thermal performance of a flat plate solar collector. Energies. 2018;11(5):1077.
[10] Khorasanizade H, Aghaei A, Ehteram H, Azimi A. Study and exergy optimization of a flat plate solar collector in a closed circuit utilized with reflectors and lenses using experimental results. Energy Engineering and Management. 2023;3(1):40-51.
[11] Hall III C, Glakpe E, Cannon J, Kerslake T. Thermodynamic analysis of space solar dynamic heat receivers with cyclic phase change. 1999.
[12] Mahanta D, Saha SK. Internal irreversibility in a water heating solar flat plate collector. Energy conversion and management. 2002;43(17):2425-35.
[13] Torres-Reyes E, Navarrete-Gonzalez J, Cervantes-de Gortari J. Thermodynamic optimization as an effective tool to design solar heating systems. Energy. 2004;29(12-15):2305-15.
[14] Farahat S, Sarhaddi F, Ajam H. Exergetic optimization of flat plate solar collectors. Renewable energy. 2009;34(4):1169-74.
[15] Faizal M, Saidur R, Mekhilef S, Hepbasli A, Mahbubul I. Energy, economic, and environmental analysis of a flat-plate solar collector operated with SiO 2 nanofluid. Clean Technologies and Environmental Policy. 2015;17:1457-73.
[16] Harkouss F, Fardoun F, Biwole PH. Multi-objective optimization methodology for net zero energy buildings. Journal of Building Engineering. 2018;16:57-71.
[17] Jani D, Mishra M, Sahoo PK. A critical review on application of solar energy as renewable regeneration heat source in solid desiccant–vapor compression hybrid cooling system. Journal of Building Engineering. 2018;18:107-24.
[18] Zhou Y, Zheng S, Zhang G. Multivariable optimisation of a new PCMs integrated hybrid renewable system with active cooling and hybrid ventilations. Journal of Building Engineering. 2019;26:100845.
[19] Shafiey Dehaj M, Hajabdollahi H. Multi-objective optimization of hybrid solar/wind/diesel/battery system for different climates of Iran. Environment, Development and Sustainability. 2021;23(7):10910-36.
[20] Hajabdollahi H, Shafiey Dehaj M. Optimization of vapor compression refrigeration cycle considering a binary mixture of working fluids using evolutionary algorithms. Energy Equipment and Systems. 2021;9(1):91-106.
[21] Bezaatpour M, Rostamzadeh H. Design and evaluation of flat plate solar collector equipped with nanofluid, rotary tube, and magnetic field inducer in a cold region. Renewable Energy. 2021;170:574-86.
[22] Qiu G, Ma Y, Song W, Cai W. Comparative study on solar flat-plate collectors coupled with three types of reflectors not requiring solar tracking for space heating. Renewable Energy. 2021, 1;169:104-16.
[23] Mohan S, Dinesha P, Iyengar AS. Modeling and analysis of a solar minichannel flat plate collector system and optimization of operating conditions using particle swarms. Thermal Science and Engineering Progress. 2021, 1;22:100855.
[24] Majumdar R, Saha SK, Patki A. Novel dimension scaling for optimal mass flow rate estimation in low temperature flat plate solar collector based on thermal performance parameters. Thermal Science and Engineering Progress. 2020, 1;19:100569..
[25] Sheikholeslami M, Farshad SA, Ebrahimpour Z, Said Z. Recent progress on flat plate solar collectors and photovoltaic systems in the presence of nanofluid: a review. Journal of Cleaner Production. 2021, 15;293:126119.
[26] Verma SK, Sharma K, Gupta NK, Soni P, Upadhyay N. Performance comparison of innovative spiral shaped solar collector design with conventional flat plate solar collector. Energy. 2020, 1;194:116853..
[27] Hajabdollahi H. Thermoeconomic assessment of integrated solar flat plat collector with cross flow heat exchanger as solar air heater using numerical analysis. Renewable Energy. 2021, 1;168:491-504.
[28] Vengadesan E, Senthil R. A review on recent developments in thermal performance enhancement methods of flat plate solar air collector. Renewable and Sustainable Energy Reviews. 2020, 1;134:110315.
[29] Ganjehkaviri A, Jaafar MM. Multi-objective particle swarm optimization of flat plate solar collector using constructal theory. Energy. 2020, 1;194:116846.
[30] Karki S, Haapala KR, Fronk BM. Technical and economic feasibility of solar flat-plate collector thermal energy systems for small and medium manufacturers. Applied Energy. 2019, 15;254:113649.
[31] Visa I, Moldovan M, Duta A. Novel triangle flat plate solar thermal collector for facades integration. Renewable Energy. 2019, 1;143:252-62.
[32] Ma Q, Ahmadi A, Cabassud C. Optimization and design of a novel small-scale integrated vacuum membrane distillation-solar flat-plate collector module with heat recovery strategy through heat pumps. Desalination. 2020, 15;478:114285.
[33] Hajabdollahi M, Shafiey Dehaj M, Hajabdollahi H. Investigation of optimization algorithms and their operating parameters in different types of heat exchangers. Energy Equipment and Systems. 2021, 1;9(4):351-70.
[34] Hajabdollahi H, Shafiey Dehaj M. Optimization of energy systems using the concept of balance in the nature. Environmental Science and Pollution Research. 2021;28(28):37580-91.
[35] Cetina-Quiñones AJ, Xamán J, Bassam A, Soberanis ME, Perez-Quintana I. Thermo-economic analysis of a flat solar collector with a phase changing material under tropical climate conditions: Residential and industrial case. Applied Thermal Engineering. 2021, 5;182:116082.
[36] Deng J, O'Donovan TS, Tian Z, King J, Speake S. Thermal performance predictions and tests of a novel type of flat plate solar thermal collectors by integrating with a freeze tolerance solution. Energy Conversion and Management. 2019, 15;198:111784.
[37] Balaji K, Kumar PG, Sakthivadivel D, Vigneswaran VS, Iniyan S. Experimental investigation on flat plate solar collector using frictionally engaged thermal performance enhancer in the absorber tube. Renewable Energy. 2019, 1;142:62-72.
[38] Anirudh K, Dhinakaran S. Numerical study on performance improvement of a flat-plate solar collector filled with porous foam. Renewable Energy. 2020, 1;147:1704-17.
[39] Hajabdollahi H, Shafiey Dehaj M, Aien M. Thermal and economic modeling and optimization of solar-assisted underfloor heating system considering hourly analysis. Journal of Thermal Analysis and Calorimetry. 2022;147(21):12079-92.
[40] Hajabdollahi H, Khosravian M, Dehaj MS. Thermo-economic modeling and optimization of a solar network using flat plate collectors. Energy. 2022, 1;244:123070..
[41] Dhairiyasamy R, Rajendran S, Khan SA, Alahmadi AA, Alwetaishi M, Ağbulut Ü. Enhancing thermal efficiency in flat plate solar collectors through internal barrier optimization. Thermal Science and Engineering Progress. 2024, 1;54:102856.
[42] Ghalati AS, Maleki A, Besharati S, Zarein M. Prediction and optimization of performance parameters of solar collectors with flat and porous plates using ANN and RSM: Case study of Shahrekord, Iran. Case Studies in Thermal Engineering. 2024, 1;60:104719..
[43] Ojeda JA, Esparza C, Méndez F. Optimizing solar collector through constructal design of Y-shaped networks with power-law nanofluid flow. Applied Thermal Engineering. 2024, 15;257:124465.
[44] Li ZY, Gong JH, Wang J, Lund PD. Optimizing research on flat-plate solar collector based on field synergy theory. Energy Reports. 2024, 1;12:1977-86.
[45] Kalogirou SA. Solar energy engineering: processes and systems. Elsevier; 2023.
[46] Foster R, Ghassemi M, Cota A. Solar energy: renewable energy and the environment. CRC press; 2009.
[47] Hay, J.E., Davies, J.A., 1980. Calculation of the solar radiation on an inclined surface. Proceedings of the first Canadian Solar Radiation Data Workshop, pp. 59.
[48] Shafiey Dehaj M, Zamani Mohiabadi M. Experimental study of water-based CuO nanofluid flow in heat pipe solar collector. Journal of Thermal Analysis and Calorimetry. 2019, 30;137:2061-72.
[49] Hajabdollahi Z, Hajabdollahi H. Thermo-economic modeling and multi-objective optimization of solar water heater using flat plate collectors. Solar Energy. 2017, 1;155:191-202.
[50] Lee PS, Garimella SV, Liu D. Investigation of heat transfer in rectangular microchannels. International journal of heat and mass transfer. 2005, 1;48(9):1688-704.
[51] Duffie John A, Beckman William A. Solar engineering of thermal processes. Wiley, New York. 1991.
[52] Mitchell JW. Heat transfer from spheres and other animal forms. Biophysical Journal. 1976, 1;16(6):561-9.
[53] Hollands K, Unny T, Raithby G, Konicek L. Free convective heat transfer across inclined air layers. 1976.
[54] Eiamsa-ard S, Promvonge P. Thermal characterization of turbulent tube flows over diamond-shaped elements in tandem. International Journal of Thermal Sciences. 2010;49(6):1051-6.
[55] Said Z, Sajid MH, Alim MA, Saidur R, Rahim NA. Experimental investigation of the thermophysical properties of AL2O3-nanofluid and its effect on a flat plate solar collector. International communications in heat and mass transfer. 2013;48:99-107.
[56] Deb K, Agrawal S, Pratap A, and Meyarivan, T. A Fast and Elitist Multi-Objective Genetic Algorithm: NSGAII. IEEE Trans. Evolutionary Computation. 2002,6: 182–197.
[57] Mahmoodabadi M, Taherkhorsandi M, Safikhani H. Modeling and hybrid Pareto optimization of cyclone separators using group method of data handling (GMDH) and particle swarm optimization (PSO). International Journal of Engineering, Transactions C. 2013;26(9):1089-102
