[1] Caetano, N.S., et al., New trends in energy production and utilization. Energy Procedia, 2017. 107: p. 7-14.
[2] Singh, N., R. Nyuur, and B. Richmond, Renewable energy development as a driver of economic growth: Evidence from multivariate panel data analysis. Sustainability, 2019. 11(8): p. 2418.
[3] Güney, T. and K. Kantar, Biomass energy consumption and sustainable development. International Journal of Sustainable Development & World Ecology, 2020. 27(8): p. 762-767.
[4] Oliveira, H. and V. Moutinho, Renewable energy, economic growth and economic development nexus: A bibliometric analysis. Energies 2021, 14, 4578. 2021, s Note: MDPI stays neu-tral with regard to jurisdictional claims in ….
[5] Mizik, T. and G. Gyarmati, Economic and sustainability of biodiesel production—a systematic literature review. Clean Technologies, 2021. 3(1): p. 19-36.
[6] Zou, C., et al., Energy revolution: From a fossil energy era to a new energy era. Natural Gas Industry B, 2016. 3(1): p. 1-11.
[7] Holechek, J.L., et al., A global assessment: can renewable energy replace fossil fuels by 2050? Sustainability, 2022. 14(8): p. 4792.
[8] Wang, F., et al., Technologies and perspectives for achieving carbon neutrality. The Innovation, 2021. 2(4).
[9] Bekirogullari, M., et al., Production of lipid-based fuels and chemicals from microalgae: An integrated experimental and model-based optimization study. Algal Research, 2017. 23: p. 78-87.
[10] Ozili, P.K. and E. Ozen, Global energy crisis: impact on the global economy. The impact of climate change and sustainability standards on the insurance market, 2023: p. 439-454.
[11] Nacke, L., A. Cherp, and J. Jewell, Phases of fossil fuel decline: Diagnostic framework for policy sequencing and feasible transition pathways in resource dependent regions. Oxford Open Energy, 2022. 1: p. oiac002.
[12] Motevali, A., et al., Environmental impacts of biodiesel production cycle from farm to manufactory: an application of sustainable systems engineering. Atmosphere, 2023. 14(2): p. 399.
[13] Ozturk, H.H., Energy analysis for biodiesel production from rapeseed oil. Energy exploration & exploitation, 2014. 32(6): p. 1005-1031.
[14] Munir, M., et al., Cleaner production of biodiesel from novel non-edible seed oil (Carthamus lanatus L.) via highly reactive and recyclable green nano CoWO3@ rGO composite in context of green energy adaptation. Fuel, 2023. 332: p. 126265.
[15] Demisu, D.G., Factors affecting biodiesel production from non-edible vegetable oil via base-catalyzed transesterification process: synthesis. Int. J. Sustain. Green Energy, 2021. 10(3): p. 85-91.
[16] Brahma, S., et al., Biodiesel production from mixed oils: A sustainable approach towards industrial biofuel production. Chemical Engineering Journal Advances, 2022. 10: p. 100284.
[17] Neupane, D., Biofuels from renewable sources, a potential option for biodiesel production. Bioengineering, 2022. 10(1): p. 29.
[18] Azadbakht, M., S.M. Safieddin Ardebili, and M. Rahmani, A study on biodiesel production using agricultural wastes and animal fats. Biomass conversion and biorefinery, 2021: p. 1-7.
[19] Okechukwu, O.D., et al., Improving heterogeneous catalysis for biodiesel production process. Cleaner Chemical Engineering, 2022. 3: p. 100038.
[20] Domínguez, Y.D., et al., Rheological behavior and properties of biodiesel and vegetable oil from Moringa oleifera Lam. Afinidad, 2019. 76(587).
[21] Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels. American Standards of Testing Materials, ASTM D6751-23, 2023.
[22] Eloka-Eboka, A.C. and F.L. Inambao, Hybridization of feedstocks—A new approach in biodiesel development: A case of Moringa and Jatropha seed oils. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2016. 38(11): p. 1495-1502.
[23] Kumar, M.V., A.V. Babu, and P.R. Kumar, The impacts on combustion, performance and emissions of biodiesel by using additives in direct injection diesel engine. Alexandria Engineering Journal, 2018. 57(1): p. 509-516.
[24] Zhang, Y., et al., Effects of different biodiesel-diesel blend fuel on combustion and emission characteristics of a diesel engine. Processes, 2021. 9(11): p. 1984.
[25] Adepoju, T. and O. Olawale, Optimization and predictive capability of RSM using controllable variables in Azadiracha indica oilseeds extraction process. International Journal of Chemistry and Materials Research, 2015. 3(1): p. 1-10.
[26] Ejigu, A., et al., Moringa stenopetala seed oil as a potential feedstock for biodiesel production in Ethiopia. Green Chemistry, 2010. 12(2): p. 316-320.
[27] Adejumo, B. and D. Abayomi, Effect of moisture content on some physical properties of Moringa oleifera seed. Journal of Agriculture and Veterinary Science, 2012. 1(5): p. 12-21.
[28] Xiao, J., et al., Evaluation of yields and quality parameters of oils from Cornus wilsoniana fruit extracted by subcritical n-butane extraction and conventional methods. Grain & Oil Science and Technology, 2022. 5(4): p. 204-212.
[29] Kabutey, A., D. Herák, and Č. Mizera, Determination of maximum oil yield, quality indicators and absorbance spectra of hulled sunflower seeds oil extraction under axial loading. Foods, 2022. 11(18): p. 2866.
[30] Demisu, D.G., S. Kebede, and D.G. Wondifraw, Hybridization of Moringa stenopetala and Azadirachta indica Seed Oil to Synthesize Biodiesel with Improved Quality. Renewable Energy Research and Applications, 2023. 4(1): p. 1-12.
[31] Aslan, N. and Y. Cebeci, Application of Box–Behnken design and response surface methodology for modeling of some Turkish coals. Fuel, 2007. 86(1-2): p. 90-97.
[32] Liu, X., et al., Transesterification of soybean oil to biodiesel using SrO as a solid base catalyst. Catalysis Communications, 2007. 8(7): p. 1107-1111.
[33] Oyerinde, A. and E. Bello, Use of fourier transformation infrared (FTIR) spectroscopy for analysis of functional groups in peanut oil biodiesel and its blends. British Journal of Applied Science & Technology, 2016. 13(3): p. 1-14.
[34] Rabelo, S.N., et al., FTIR analysis for quantification of fatty acid methyl esters in biodiesel produced by microwave-assisted transesterification. International Journal of Environmental Science and Development, 2015. 6(12): p. 964.
[35] Rosset, M. and O.W. Perez-Lopez, FTIR spectroscopy analysis for monitoring biodiesel production by heterogeneous catalyst. Vibrational Spectroscopy, 2019. 105: p. 102990.
[36] Jaggi, N. and D. Vij, Fourier transform infrared spectroscopy, in Handbook of Applied Solid State Spectroscopy. 2006, Springer. p. 411-450.
[37] Dubé, M.A., et al., A comparison of attenuated total reflectance‐FTIR spectroscopy and GPC for monitoring biodiesel production. Journal of the American Oil Chemists' Society, 2004. 81(6): p. 599-603.
[38] Vlachos, N., et al., Applications of Fourier transform-infrared spectroscopy to edible oils. Analytica chimica acta, 2006. 573: p. 459-465.
[39] O’Donnell, S., et al., A review on the spectroscopic analyses of biodiesel. European International Journal of Science and Technology, 2013. 2(7): p. 137-146.
[40] Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity. American Society for Testing and Materials, (ASTM, D445), 2022.
[41] ASTM D240-19, Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter. American Society for Testing Materials, ASTM D1298, 2019.
[42] Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter. American Society for Testing Materials, ASTM D4052, 2023.
[43] Standard Test Method for Cetane Number of Diesel Fuel Oil. American Society for Testing Materials, ASTM D613, 2023.
[44] Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration. American Society for Testing Materials, ASTM D664, 2019.
[45] Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. American Society for Testing Materials, ASTM D93, 2020.
[46] Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography. American Society for Testing aterials, ASTM D6584, 2022.
[47] Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels. American Society for Testing Materials, ASTM, D2500, 2023.
[48] Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge. American Society for Testing Materials, ASTM D2709-96, 2022.
[49] European Union’s EN 14112, Fat and oil derivatives - Fatty Acid Methyl Esters (FAME), Determination of oxidation stability (accelerated oxidation test), 2020.
[50] Standard Test Method for Pour Point of Crude Oils. American Society for Testing and Materials, ASTM D5853, 2018.
[51] Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method. American Society for Testing Materials, ASTM D1298, 2022.
[52] European Union’s EN 14538, Fat and oil derivatives - Fatty acid methyl ester (FAME), Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES),2006.
[53] Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence. American Society for Testing Materials, ASTM D5453, 2019.
