[1] Malkin S, Guo C (2008) Grinding Technology: Theory and Applications of Machining with Abrasives, 2nd edition. Industrial Press Inc, New York, USA.
[2] Rabiei F, Rahimi AR, Hadad MJ, Saberi A (2017) Experimental evaluation of coolant-lubricant properties of nanofluids in ultrasonic assistant MQL grinding. Int J Adv Manuf Technol 93:3935–3953.
[3] Tawakoli T, Hadad MJ, Sadeghi MH (2010) Investigation on minimum quantity lubricant-MQL grinding of 100Cr6 hardened steel using different abrasive and coolant-lubricant types. International Journal of Machine Tools & Manufacture 50:698-708.
[4] Tawakoli T, Hadad MJ, Sadeghi MH, Daneshi A, Sadeghi B (2011) Minimum quantity lubrication in grinding: effects of abrasive and coolant-lubricant types. Journal of Cleaner Production 19:2088-2099.
[5] Sadeghi MH, Hadad MJ, Tawakoli T, Vesali A, Emami M (2010) An investigation on surface grinding of AISI 4140 hardened steel using minimum quantity lubrication-MQL technique. International Journal of Material Forming 3:241-251.
[6] Moghadasi A, Hadad MJ (2019) Towards sustainable machining of 17-4 PH stainless steel using hybrid MQL-hot turning process. Energy Equipment and Systems 7: 339-352
[7] Tawakoli T, Hadad MJ, Daneshi A, Sadeghi MH, Sadeghi B (2011) Study on the effects of abrasive and coolant-lubricant types on minimum quantity lubrication-MQL grinding. Advanced Materials Research 325:231-237.
[8] Hadad MJ, Tawakoli T, Sadeghi MJ, Sadeghi B (2012) Temperature and energy partition in minimum quantity lubrication-MQL grinding process. International Journal of Machine Tools & Manufacture 54-55:10-17.
[9] Rabiei F, Rahimi AR, Hadad MJ, Ashrafijou M (2015) Performance improvement of minimum quantity lubrication (MQL) technique in surface grinding by modeling and optimization. Journal of Cleaner Production 86:447-460.
[10] Dixit US, Sarma DK, Davim JP (2012) Environmentally friendly machining. Springer-Verlag, New York, USA.
[11] Hadad MJ, Sharbati A (2017) Analysis of the effects of dressing and wheel topography on grinding process under different coolant-lubricant conditions. Int J Adv Manuf Technol 90:3727-3738.
[12] Rabiei F, Rahimi AR, Hadad MJ (2017) Performance improvement of eco-friendly MQL technique by using hybrid nanofluid and ultrasonic-assisted grinding. Int J Adv Manuf Technol 93:1001-1015.
[13] Tawakoli T, Hadad MJ, Sadeghi MH (2010) Influence of oil mist parameters on minimum quantity lubrication-MQL grinding process. International Journal of Machine Tools & Manufacture 50:521-531.
[14] Hadad MJ (2015) An experimental investigation of the effects of machining parameters on environmentally friendly grinding process. Journal of Cleaner Production 108:217-231.
[15] Hadad MJ, Sadeghi B (2013) Minimum quantity lubrication-MQL turning of AISI 4140 steel alloy. Journal of Cleaner Production 54:332-343.
[16] Daneshi A (2019) Micro chip formation mechanism in grinding of Nickel-base superalloy-Inconel 718. Ph.D. Thesis, Department of Microsystems Engineering-IMTEK, Faculty of Engineering, University of Freiburg, Germany.
[17] Tawakoli T, Hadad MJ, Sadeghi MH, Daneshi A, Stöckert S, Rasifard A (2009) An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication-MQL grinding. International Journal of Machine Tools & Manufacture 49:924-932.
[18] Hadad MJ (2010) Minimum Quantity Lubrication-MQL grinding process & investigation of surface quality. Ph.D. Thesis, Manufacturing Engineering Division, School of Engineering, Tarbiat Modares University, Tehran, Iran.
[19] Hadad MJ, Tawakoli T, Sadeghi MH, Sadeghi B (2012) Temperature and energy partition in minimum quantity lubrication-MQL grinding process. International Journal of Machine Tools & Manufacture 54:10-17.
[20] Hadad MJ, Sadeghi B (2012) Thermal analysis of minimum quantity lubrication-MQL grinding process. International Journal of Machine Tools & Manufacture 63:1–15.
[21] Sadeghi MH, Haddad MJ, Tawakoli T, Emami M (2009) Minimal quantity lubrication-MQL in grinding of Ti-6Al-4V titanium alloy. International Journal of Advanced Manufacturing Technology 44:487-500.
[22] Marinescu ID, Hitchiner M, Uhlmann E, Rowe WB, Inasaki I (2007) Handbook of Machining with Grinding Wheels. CRC Press, Taylor & Francis Group.