Study of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells

Authors

Mechanical Engineering Department, Shahrekord University, Shahrekord, Iran

Abstract

In this study, a periodic zigzag channel with rectangular cross-section has been used in order to obtain a high-efficiency system for cooling a polymer electrolyte fuel cell. An appropriate function of fuel cells and enhancement of their lifetime require uniform temperature conditions of around 80°C. On the other hand, due to volume and weight constraints, a low-density compact heat exchanger is required, where the coolant fluid is water and the flow regime is laminar with a Reynolds number of 200. In order to consider these problems and increase the heat transfer rate under these conditions, a three-dimensional periodic zigzag channel is employed and the results are compared with the results which have been obtained for the straight channel. The results indicate that the zigzag channel generates chaotic advection and provides a good mixture of the hot fluid adjacent to the wall and the cool fluid away from it. This leads to a uniform temperature distribution along the channel. In addition, the values of Nusselt number and friction coefficient show that average Nusselt number in the zigzag channel is 6.5 times larger than that in the straight channel while the pressure drop remains approximately constant.

Keywords

References

[1] Asneghi A., Sarikhani N., Sadughi A. H., Kermani M. J., 3D Simulation and Product a 2 Watt Fuel Cell, in The 15th International Conference on Mechanical Ingineering, Tehran, Iran (2007).
[2] Ghafari­­­­tehrani A., Nozad A., Poornajadi A. B., Numerical Simulation of Fluid Flow in Gas Diffusion Layers and its Effect on PEMFC Efficiency, in The 1th National Conference on Hydrojen and Fuel cell, Tehran, Iran (2009).   
[3] Chen F.C., Gao Z., Loutfy R.O., Hecht, M. Analyses of Optimal Heat Transfer in a PEM Fuel Cell Cooling Plate, Fuel Cells (2003)3(4): 181–188.
[4] Lasbet Y., Auvity B., Castelain C., Peerhossaini H., A Chaotic Heat-Exchanger for PEMFC Cooling Applications, Power Sources (2006) 156(1): 114-118.
[5] Choi J., Kim Y.H., Lee Y., Lee K.J., Kim Y.C., Numerical Analysis on the Performance of Cooling Plates in a PEFC , Mechanical Science and Technology (2008) 22: 1417–1425.
[6] Yu S.H., Sohn S., Nam J.H., Kim C., Numerical Study to Examine the Performance of Multi-Pass Serpentine Flow-Fields for Cooling Plates in Polymer Electrolyte Membrane Fuel Cells, Power Sources (2009) 194: 697–703,.
[7] Dean W. R., Note on the Motion of Fluid in a Curved Pipe, The Philosophical Magazine (1927) 4: 208–223,.
[8] Wang L., Liu F., Forced Convection in Slightly Curved Micro Channels, International Journal of Heat and Mass Transfer (2007) 50( 5–6): 881–896.
[9] Aref H., Stirring by Chaotic Advection, Journal of Fluid Mechanics (1984)143: 1–21.
[10] Wiggins S., Ottino J.M., Foundation of Chaotic Mixes (2004) 362: 937–970.
[11] Acharya N., Sen M., Chang H. C., Heat Transfer Enhancement in Coiled Tubes by Chaotic Mixing, Heat and Mass Transfer (1992) 35 (10) 2475-2489.
[12] Mokrani A., Castelian C., Peerhossaini H., The Effects of Chaotic Advection on Heat Transfer, Heat and Mass Transfer (1997) 40(13): 3089-3104.
[13] Xia H. M., Wang Z.P., Wan S. Y. M., Yin F.F., Numerical Study on Microstructured Reactor with Chaotic Heat and Mass Transfer and its Potential Application for Exothermic Process, Chemical Engineering Research and Design (2012) 90: 1719–1726.
[14] Senn S.M., Poulikakos D., Laminar Mixing, Heat Transfer and Pressure Drop in Tree-Like Micro Channel Nets and Their Application for Thermal Management in Polymer Electrolyte Fuel Cells, Power Sources (2004) 130: 178–191.
[15] Kuo J. K., Yen T. S., Chen C. K., Improvement of Performance of Gas Flow Channel in PEM Fuel Cells, Energy Conversion and Management (2008) 49: 2776–2787.
[16] Liu R.H., Stremler M.A., Sharp K.V., Olsen M.G., Santiago J.G., Adrian R.J., Aref H., Beebe D.J., Passive Mixing in a Three-Dimensional Serpentine Microchannel, Microelectromechanical Systems (2000) 9: 190–197.
[17] Gupta R., Geyer P. E., Fletcher D. F., Haynes B. S., Thermo Hydraulic Performance of a Periodic Trapezoidal Channel with a Triangular Cross-Section, Heat and Mass Transfer (2008) 51: 2925–2929.
[18] Sui Y., Teo C.J., Lee P.S., Chew Y.T., Shu C., Fluid Flow and Heat Transfer in Wavy Micro Channels, Heat and Mass Transfer (2010) 53: 2760–2772.
[19] Sui Y., Teo C.J., Lee P.S., Direct Numerical Simulation of Fluid Flow and Heat Transfer in Periodic Wavy Channels with Rectangular Cross-Sections, Heat and Mass Transfer (2012) 55: 73–88.
[20] Mengeaud V., Josserand J., Girault H.H., Mixing Processes in a Zigzag Micro Channel: Finite Element Simulation and Optical Study, Analytical Chemistry (2002) 74: 4279–4286.
[21] Zheng Z., Fletcher D. F., Haynes B. S., Transient Laminar Heat Transfer Simulations in Periodic Zigzag Channels, Heat and Mass Transfer (2014) 71: 758–768.
[22] Zheng Z., Fletcher D. F., Haynes B. S., Chaotic Advection in Steady Laminar Heat Transfer Simulations: Periodic Zigzag Channels with Square Cross-Sections, Heat and Mass Transfer (2013) 57: 274–284.
[23] Vinsard G., Dufour S., Saatdjian E., Mota J. P. B., Chaotic Advection and Heat Transfer in Two Similar 2‑D Periodic Flows and in Their Corresponding 3‑D Periodic Flows, Heat Mass Transfer (2016) 52: 521–530.
[24] Anxionnaz-Minvielle Z., Tochon P., Couturier R., Magallon C., Théron F., Cabassud M., Gourdon C., Implementation of ‘Chaotic’ Advection for Viscous Fluids in Heat Exchanger/Reactors, Chemical Engineering and Processing (2017) 113: 118–127.
[25] Bahiraei M., Mazaheri N., Alighardashi M., Development of Chaotic Advection in Laminar Flow of a Non-Newtonian Nanofluid: A Novel Application for Efficient Use of Energy, Applied Thermal Engineering (2017) 124: 1213–1223.
[26] Marco S. M., Han L. S., A Note on Limiting Laminar Nusselt Number in Ducts with Constant Temperature Gradient by Analogy to Thin-Plate Theory, Heat Transfer (1955) 77: 625-630.
[27] Natarajan N. M., Lakshmanan S. M., Laminar Flow in Rectangular Ducts: Prediction of Velocity Profiles and Friction Factor, Indian Journal of Technology (1972) 10: 435-438.
[28] Spiga M., G.L. Morini, Nusselt Numbers in Laminar Flow for H2 Boundary Conditions, Heat and Mass Transfer (1996) 39: 1165–1174.
[29] Perng S. W., Wu H. W., Heat Transfer in a PEMFC Flow Channel, Applied Thermal Engineering (2009) 29: 3579–3594.
[30] Guo Z. Y., Li D.Y.  , Wang B. X., A Novel Concept for Convective Heat Transfer Enhancement, International Journal of Heat and Mass Transfer (1998) 41: 2221–2225.
[31] Schmidt E., Properties of Water and Steam in SI-Units, Springer, New York (1989).
[32] Castelain C., Mokrani A., Le Guer Y., Peerhossaini H., Experimental Study of Chaotic Advection Regime in a Twisted Duct Flow the European Journal of Mechanics B Fluids (2001) 20: 205–232.
[33] Jiang F., Drese K. S., Hardt S., Küpper M., Schnfeld F., Helical Flows and Chaotic Mixing in Curved Micro Channels", AIChE (2004) 50: 2297–2305.
[34] Hobbs D. M., Muzzio F. J., Optimization of a Static Mixer Using Dynamical Systems Techniques, Chemical Engineering Science (1998) 53: 3199–3213.
[35] Aubin J., Fletcher D. F., Xuereb C., Design of Micromixers Using CFD Modeling, Chemical Engineering Science (2005) 60: 2503–2516.
[36] Ottino J. M., The Kinematic of Mixing: Stretching, Chaos and Transport, Cambridge University Press, New York (1989).
Energy Equipment and Systems
Volume 6, Issue 4 - Serial Number 4
December 2018
Pages 393-412

Files

Share

How to cite

Statistics