Keyword Index

A

  • ABAQUS Development of a laboratory system to investigate and store electrical energy from the vibrations of a piezoelectric beam [Volume 4, Issue 2, 2016, Pages 161-168]
  • Absorber Plate Numerical investigation on thermal performance enhancement of a flat-plate natural flow double-pass solar air heater – The effect of the absorber plate [Volume 10, Issue 4, 2022, Pages 353-374]
  • Activated Carbon Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate [Volume 8, Issue 4, 2020, Pages 339-348]
  • Active and Reactive Power Control Active and reactive power control via currents of a rotor’s d and q components with nonlinear predictive control strategy in a doubly fed induction generator based on wind power system [Volume 3, Issue 2, 2015, Pages 143-157]
  • Active Cluster Evaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity [Volume 4, Issue 1, 2016, Pages 11-19]
  • Active Method Toward the design of zero energy buildings (ZEB) in Iran: Climatic study [Volume 7, Issue 2, 2019, Pages 111-119]
  • Active Triple Phase Boundary Length Evaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity [Volume 4, Issue 1, 2016, Pages 11-19]
  • Actuator Disc Reaching the betz limit experimentally and numerically [Volume 7, Issue 3, 2019, Pages 271-278]
  • Adjusting Values Experimental values for adjusting an automatic control valve in gas pipeline transportation [Volume 6, Issue 2, 2018, Pages 221-233]
  • Adsorption A modified cellular automaton model for simulating ion dynamics in a Li-ion battery electrode [Volume 10, Issue 1, 2022, Pages 41-49]
  • Aeroacoustics Effect of grid resolution on NACA0012 self-noise prediction by large eddy simulation [Volume 10, Issue 4, 2022, Pages 389-399]
  • Aerodynamic Aerodynamic optimal design of wind turbine blades using genetic algorithm [Volume 2, Issue 2, 2014, Pages 185-193]
  • Aerodynamic Optimization Aerodynamic optimization of a 5 Megawatt wind turbine blade [Volume 4, Issue 2, 2016, Pages 133-145]
  • Aerodynamic performance Aerodynamic design and economical evaluation of site specific horizontal axis wind turbine (HAWT) [Volume 2, Issue 1, 2014, Pages 43-56]
  • Aerodynamics Simulation of an airfoil with a deformable flap applicable in wind turbine structural load reduction [Volume 8, Issue 3, 2020, Pages 297-306]
  • Aeroelastic Numerical aeroelastic analysis of wind turbine NREL Phase VI Rotor [Volume 3, Issue 1, 2015, Pages 45-56]
  • Aeroelasticity A robust engineering approach for wind turbine blade profile aeroelastic computation [Volume 2, Issue 2, 2014, Pages 121-128]
  • Agriculture Energy flow modeling of broiler production in Guilan province of Iran [Volume 5, Issue 4, 2017, Pages 411-418]
  • Air A numerical study on the effects of hydrogen addition levels, wall thermal conductivity and inlet velocity on methane/air pre-mixed flame in a micro reactor [Volume 2, Issue 2, 2014, Pages 103-119]
  • Airlift pump Simulation of gas-liquid two phase flow in upriser pipe of gas-lift systems [Volume 2, Issue 1, 2014, Pages 25-42]
  • Air pollution Impact of covid-19 on biofuels global market and their utilization necessity during pandemic [Volume 9, Issue 4, 2021, Pages 371-382]
  • Al2O3 Investigation with rheological behavior of liquid paraffin/Al2O3 nanofluid: Experimental approach [Volume 7, Issue 2, 2019, Pages 149-158]
  • Alternating Elliptical Axis Tube Investigation of convective heat transfer, pressure drop and efficiency of ZnO/water nanofluid in alternating elliptical axis tubes [Volume 8, Issue 3, 2020, Pages 203-215]
  • Alternating Flattened Tube Experimental investigation of heat transfer, pressure drop, and efficiency of TiO2/Oil nanofluid in alternating flattened tubes [Volume 10, Issue 2, 2022, Pages 123-136]
  • Alternating Hexagonal Tube Study on heat transfer, pressure drop and efficiency of ZnO/Oil nanofluid in a novel hexagonal tube [Volume 11, Issue 2, 2023, Pages 247-259]
  • Analytical hierarchy process A mixed integer nonlinear programming model for optimizing a gas pipeline transmission linear network [Volume 6, Issue 4, 2018, Pages 351-366]
  • Analytical Hierarchy Process (AHP) Proposing a quantitative approach to measure the success of energy management systems in accordance with ISO 50001: 2011 using an analytical hierarchy process (AHP) [Volume 5, Issue 4, 2017, Pages 349-355]
  • Analytical Methods Optimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force [Volume 5, Issue 1, 2017, Pages 1-11]
  • ANFIS ANFIS modeling and validation of a variable speed wind turbine based on actual data [Volume 7, Issue 3, 2019, Pages 249-262]
  • Annual Solar Fraction Optimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions [Volume 4, Issue 2, 2016, Pages 271-279]
  • Anode Evaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity [Volume 4, Issue 1, 2016, Pages 11-19]
  • ANSYS CFX Performance improvement of a wind turbine blade using a developed inverse design method [Volume 4, Issue 1, 2016, Pages 1-10]
  • Anti-Surge Development of a compression system dynamic simulation code for testing and designing of anti-surge control system [Volume 7, Issue 2, 2019, Pages 99-110]
  • Apple Applying data envelopment analysis (DEA) to improve energy efficiency of apple fruit, focusing on cumulative energy demand [Volume 9, Issue 1, 2021, Pages 37-52]
  • Aquifer Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer [Volume 5, Issue 4, 2017, Pages 341-348]
  • ArcGIS Possibility of supplying energy to border villages by solar energy sources [Volume 9, Issue 3, 2021, Pages 279-289]
  • ARMA Scenario based technique applied to photovoltaic sources uncertainty [Volume 7, Issue 3, 2019, Pages 297-308]
  • Artificial neural network The development and evaluation of a portable polyethylene biogas reactor [Volume 6, Issue 1, 2018, Pages 61-68]
  • ASPEN HYSYS Optimization of energy consumption and offering a procedure for cooling gas compression facilities at gas compression stations [Volume 3, Issue 2, 2015, Pages 113-124]
  • Asymmetric Fault Simultaneous power sharing and protection against faults for DGs in microgrid with different loads [Volume 7, Issue 3, 2019, Pages 279-295]
  • Atrium Energy consumption of atria; the case of a commercial-office center in the semi-arid climate of Tehran [Volume 7, Issue 3, 2019, Pages 211-234]
  • Atrium Geometry Energy consumption of atria; the case of a commercial-office center in the semi-arid climate of Tehran [Volume 7, Issue 3, 2019, Pages 211-234]
  • Automatic Control Valve Experimental values for adjusting an automatic control valve in gas pipeline transportation [Volume 6, Issue 2, 2018, Pages 221-233]
  • Automatic Generation Control (AGC) Optimizing the AGC system of a three-unequal-area hydrothermal system based on evolutionary algorithms [Volume 6, Issue 1, 2018, Pages 101-116]

B

  • Backbone Anisotropy An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes [Volume 5, Issue 3, 2017, Pages 251-264]
  • Backward Facing Step LES/FMDF of premixed methane/air flow in a backward-facing step combustor [Volume 7, Issue 2, 2019, Pages 159-173]
  • Balanced Scorecard (BSC) A new approach for performance evaluation of energy-related enterprises [Volume 6, Issue 1, 2018, Pages 16-26]
  • Batchelor & Stewartson Flow Numerical simulation of incompressible turbulent flow in shrouded disk system with radial outflow [Volume 7, Issue 1, 2019, Pages 1-10]
  • Battery Review, analysis and simulation of different structures for hybrid electrical energy storages [Volume 5, Issue 2, 2017, Pages 115-129]
  • Battery Electric Vehicles Investigating carbon emission abatement long-term plan with the aim of energy system modeling; case study of Iran [Volume 6, Issue 4, 2018, Pages 337-349]
  • BEM Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
  • BEM & GA Aerodynamic optimal design of wind turbine blades using genetic algorithm [Volume 2, Issue 2, 2014, Pages 185-193]
  • BEM theory Aerodynamic design and economical evaluation of site specific horizontal axis wind turbine (HAWT) [Volume 2, Issue 1, 2014, Pages 43-56]
  • Betz Limit Reaching the betz limit experimentally and numerically [Volume 7, Issue 3, 2019, Pages 271-278]
  • Bezier curve Aerodynamic optimization of a 5 Megawatt wind turbine blade [Volume 4, Issue 2, 2016, Pages 133-145]
  • Bio-Alcohols The investigation of performance and emission of a gasoline engine using novel gasoline and bio-alcohols fuel blends [Volume 11, Issue 2, 2023, Pages 145-163]
  • Biodiesel The effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine [Volume 5, Issue 1, 2017, Pages 59-69]
  • Biofuels Impact of covid-19 on biofuels global market and their utilization necessity during pandemic [Volume 9, Issue 4, 2021, Pages 371-382]
  • Biomass A thermodynamic model for exergetic performance and optimization of a solar and biomass-fuelled multigeneration system [Volume 4, Issue 2, 2016, Pages 281-289]
  • Biomass Simulation and modeling of hydrogen production from glucose biomass model compound via hydro-thermal gasification [Volume 6, Issue 2, 2018, Pages 211-219]
  • Biomass Dryer Design and optimization of solar-assisted conveyer-belt dryer for biomass [Volume 5, Issue 2, 2017, Pages 85-94]
  • Biomass Gasification Thermoeconomic comparison between the performance of small-scale internal combustion engines and gas turbines integrated with a biomass gasifier [Volume 2, Issue 1, 2014, Pages 57-82]
  • Biomass Gasification Xergy analysis and multiobjective optimization of a biomass gasification-based multigeneration system [Volume 6, Issue 1, 2018, Pages 69-87]
  • Bio Nanofluid Investigation of thermal performance and entropy generation in a microchannel heatsink with a wavy channel using bio nanofluid [Volume 10, Issue 1, 2022, Pages 27-40]
  • Blade Element Momentum A semi-analytical model for velocity profile at wind turbine wake using blade element momentum [Volume 3, Issue 1, 2015, Pages 13-24]
  • Blade Element Momentum Theory (BEM) Aerodynamic optimization of a 5 Megawatt wind turbine blade [Volume 4, Issue 2, 2016, Pages 133-145]
  • Block Joint Study of thermal performance of building roofs in the city of Tehran [Volume 6, Issue 3, 2018, Pages 305-315]
  • Boiler Investigation of a single-reheat condensing steam power plant based on energy and exergy analysis [Volume 2, Issue 2, 2014, Pages 155-170]
  • Boiler Efficiency Study on performance and methods to optimize thermal oil boiler efficiency in cement industry [Volume 4, Issue 1, 2016, Pages 53-64]
  • Boost Converter Improvement of perturb and observe method for maximum power point tracking in wind energy conversion system using fuzzy controller [Volume 4, Issue 2, 2016, Pages 111-122]
  • Brayton cycle Conceptual design of a super-critical CO2 brayton cycle based on stack waste heat recovery for shazand power plant in Iran [Volume 2, Issue 1, 2014, Pages 95-101]
  • Brushless DC A review on recent applications of brushless DC electric machines and their potential in energy saving [Volume 3, Issue 1, 2015, Pages 57-71]
  • Brush Seal Effect of a ring type barrier and rotational speed on leakage flow of gas turbine brush seal [Volume 7, Issue 4, 2019, Pages 389-399]
  • Bubble Detachment Characteristics Experimental investigation of bubble growth and detachment in stagnant liquid column using image – based analysis [Volume 7, Issue 4, 2019, Pages 353-375]
  • Bubble Diameter Correlation Experimental investigation of bubble growth and detachment in stagnant liquid column using image – based analysis [Volume 7, Issue 4, 2019, Pages 353-375]
  • Bubble growth Experimental investigation of bubble growth and detachment in stagnant liquid column using image – based analysis [Volume 7, Issue 4, 2019, Pages 353-375]
  • Bubble Volume A method for bubble volume measurement under constant flow conditions in gas–liquid two-phase flow [Volume 6, Issue 1, 2018, Pages 89-99]
  • Building Transient simulation and 4E Analyses of a hybrid renewable energy system for an educational building [Volume 11, Issue 2, 2023, Pages 123-144]
  • Building Energy Consumption Simulation-based optimization of smart windows performance using coupled EnergyPlus - NSGA-II - ANP method [Volume 9, Issue 1, 2021, Pages 1-13]
  • Building Envelope Net zero energy buildings in semi-arid climates: An analysis on 3 case studies in Tehran, Iran [Volume 8, Issue 2, 2020, Pages 169-178]
  • Building Roof Study of thermal performance of building roofs in the city of Tehran [Volume 6, Issue 3, 2018, Pages 305-315]

C

  • Cantilever Beam Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
  • Cantilever Beam Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations [Volume 8, Issue 1, 2020, Pages 91-102]
  • Carbon dioxide Simulation and modeling of hydrogen production from glucose biomass model compound via hydro-thermal gasification [Volume 6, Issue 2, 2018, Pages 211-219]
  • Carbon Emission Determining the optimal size of a ground source heat pump within an air-conditioning system with economic and emission considerations [Volume 5, Issue 3, 2017, Pages 219-226]
  • Carbon Emission Investigating carbon emission abatement long-term plan with the aim of energy system modeling; case study of Iran [Volume 6, Issue 4, 2018, Pages 337-349]
  • Carbon emissions Significant factors for enhancing the life cycle assessment of photovoltaic thermal air collector [Volume 7, Issue 2, 2019, Pages 175-197]
  • Carbon Neutral Fuel Economic assessment of solar-based hydrogen for methanol production [Volume 8, Issue 3, 2020, Pages 263-273]
  • Car Engine Thermal performance enhancement of automobile radiator using water-CuO nanofluid: an experimental study [Volume 7, Issue 3, 2019, Pages 235-248]
  • Cascade Condenser The energy and exergy analysis of a novel cogeneration organic Rankine power and two-stage compression refrigeration cycle [Volume 5, Issue 3, 2017, Pages 299-312]
  • Case Study A feasibility study and economic analysis for application of nanofluids in waste heat recovery [Volume 4, Issue 2, 2016, Pages 205-214]
  • Cavitation Numerical simulation of turbulent flow around the dtmb4119 propeller in open water conditions [Volume 6, Issue 1, 2018, Pages 39-49]
  • Cavity Flow Numerical simulation of incompressible turbulent flow in shrouded disk system with radial outflow [Volume 7, Issue 1, 2019, Pages 1-10]
  • CCCP Techno-economic operation optimization of a HRSG in combined cycle power plants based on evolutionary algorithms: A case study of Yazd, Iran [Volume 7, Issue 1, 2019, Pages 67-79]
  • CCHP Exergo-environmental and exergo-economic analyses and multi-criteria optimization of a novel solar-driven CCHP based on Kalina cycle [Volume 4, Issue 2, 2016, Pages 225-244]
  • Cement Industry Energy auditing in cement industry: A case study [Volume 2, Issue 2, 2014, Pages 171-184]
  • Centrifugal Compressor Effect of impeller geometry on performance characteristics of centrifugal compressor [Volume 7, Issue 2, 2019, Pages 121-132]
  • Centrifugal Force Life span prediction for the last row blade of steam turbine [Volume 9, Issue 1, 2021, Pages 14-25]
  • CFD Numerical aeroelastic analysis of wind turbine NREL Phase VI Rotor [Volume 3, Issue 1, 2015, Pages 45-56]
  • CFD Optimization of turbine blade cooling with the aim of overall turbine performance enhancement [Volume 5, Issue 1, 2017, Pages 71-83]
  • CFD Performance evaluation of trapezoidal teeth labyrinth seal [Volume 5, Issue 3, 2017, Pages 265-273]
  • CFD 4E analysis and multi-objective optimization of gas turbine CCHP plant with variable ambient temperature [Volume 5, Issue 3, 2017, Pages 285-298]
  • CFD Shape optimization of impingement and film cooling holes on a flat plate using a feedforward ANN and GA [Volume 6, Issue 3, 2018, Pages 247-259]
  • CFD Modification of pump as turbine as a soft pressure reduction systems (SPRS) for utilization in municipal water network [Volume 7, Issue 1, 2019, Pages 41-56]
  • CFD Effect of impeller geometry on performance characteristics of centrifugal compressor [Volume 7, Issue 2, 2019, Pages 121-132]
  • CFD Reaching the betz limit experimentally and numerically [Volume 7, Issue 3, 2019, Pages 271-278]
  • CFD Effect of a ring type barrier and rotational speed on leakage flow of gas turbine brush seal [Volume 7, Issue 4, 2019, Pages 389-399]
  • CFD Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
  • CFD Fluid-solid interaction analysis of cantilever plate behind a fixed cylinder in parallel flow: Application to energy harvesters [Volume 11, Issue 1, 2023, Pages 43-53]
  • CFD Simulation Improvement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials [Volume 2, Issue 2, 2014, Pages 141-154]
  • CFD Simulation Numerical simulation of turbulent flow around the dtmb4119 propeller in open water conditions [Volume 6, Issue 1, 2018, Pages 39-49]
  • Channel Spacer A numerical study of the effect of channel spacers on the performance of cross-flow forward osmosis membrane modules [Volume 8, Issue 3, 2020, Pages 237-251]
  • Chaotic Advection Study of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells [Volume 6, Issue 4, 2018, Pages 393-412]
  • Chevron Angle The effect of hemispherical chevrons angle, depth, and pitch on the convective heat transfer coefficient and pressure drop in compact plate heat exchangers [Volume 4, Issue 1, 2016, Pages 31-41]
  • Chevron Depth The effect of hemispherical chevrons angle, depth, and pitch on the convective heat transfer coefficient and pressure drop in compact plate heat exchangers [Volume 4, Issue 1, 2016, Pages 31-41]
  • Chevron Pitch The effect of hemispherical chevrons angle, depth, and pitch on the convective heat transfer coefficient and pressure drop in compact plate heat exchangers [Volume 4, Issue 1, 2016, Pages 31-41]
  • Chip Formation Experimental investigation on the environmentally friendly turning of Al7075 using ultrasonic nozzle-minimum quantity lubrication (UN-MQL) system [Volume 11, Issue 2, 2023, Pages 193-211]
  • City of Tehran Study of thermal performance of building roofs in the city of Tehran [Volume 6, Issue 3, 2018, Pages 305-315]
  • Clean Energy Harvesting Parametric study of a novel oscillatory wind turbine [Volume 7, Issue 4, 2019, Pages 377-387]
  • Climate change The food-energy-water nexus: A framework for sustainable development modeling [Volume 8, Issue 2, 2020, Pages 179-201]
  • Climate Study On the effect of using phase change materials in energy consumption and CO2 emission in buildings in Iran: a climatic and parametric study [Volume 3, Issue 2, 2015, Pages 73-81]
  • Climatic Conditions Dynamic simulation of a qanat source heat pump in different climatic conditions [Volume 10, Issue 3, 2022, Pages 309-326]
  • Closed System Experimental study of nanofluid effects on heat transfer in closed cycle system in shell and tube heat exchangers at Isfahan power plant [Volume 4, Issue 2, 2016, Pages 95-109]
  • CLSVOF Method Motion dynamics of a water drop located on a hydrophobic inclined surface under uniform airflow [Volume 10, Issue 3, 2022, Pages 215-227]
  • CO2 emission A review on recent applications of brushless DC electric machines and their potential in energy saving [Volume 3, Issue 1, 2015, Pages 57-71]
  • CO2 emission Techno-Econo-Environmental study on the use of domestic-scale wind turbines in Iran [Volume 7, Issue 4, 2019, Pages 317-338]
  • CO2 Emission Reduction On the effect of using phase change materials in energy consumption and CO2 emission in buildings in Iran: a climatic and parametric study [Volume 3, Issue 2, 2015, Pages 73-81]
  • CO2 Saving Energy and environmental performance of a grid-connected concentrating photovoltaic thermal system for residential buildings in Iran [Volume 9, Issue 2, 2021, Pages 173-190]
  • CO2 Saving Application of artificial neural network for prediction of energy flow in wheat production based on mechanization development approach [Volume 9, Issue 2, 2021, Pages 191-207]
  • Cobb-Douglas Model Energy use efficiency, GHG emissions, and carbon efficiency of paddy rice production in Iran [Volume 4, Issue 2, 2016, Pages 169-176]
  • Cobb-Douglas Model Application of ANFIS and linear regression models to analyze the energy and economics of lentil and chickpea production in Iran [Volume 4, Issue 2, 2016, Pages 255-270]
  • Coefficient of performance Dynamical modeling and thermo-economic optimization of a cold room assisted vapor-compression refrigeration cycle [Volume 8, Issue 2, 2020, Pages 153-167]
  • Coefficient of performance Optimization of vapor compression refrigeration cycle considering a binary mixture of working fluids using evolutionary algorithms [Volume 9, Issue 1, 2021, Pages 91-106]
  • Cogeneration Thermoeconomic analysis of a hybrid PVT solar system integrated with double effect absorption chiller for cooling/hydrogen production [Volume 6, Issue 4, 2018, Pages 413-427]
  • Cogeneration Cycle The energy and exergy analysis of a novel cogeneration organic Rankine power and two-stage compression refrigeration cycle [Volume 5, Issue 3, 2017, Pages 299-312]
  • Cold Room Dynamical modeling and thermo-economic optimization of a cold room assisted vapor-compression refrigeration cycle [Volume 8, Issue 2, 2020, Pages 153-167]
  • Combined Cooling Heating and Power Equipment capacity optimization of an educational building’s CCHP system by genetic algorithm and sensitivity analysis [Volume 5, Issue 4, 2017, Pages 375-387]
  • Combined Cooling, Heating and Power (CCHP) Cycle Theoretical analysis of a novel combined cooling, heating, and power (CCHP) cycle [Volume 5, Issue 3, 2017, Pages 241-249]
  • Combined Cycle Power Plant, Simulation, Membrane Process, Assaloye Simulation and economic evaluation of heat and power generation from flare gases in a combined cycle power plant [Volume 8, Issue 4, 2020, Pages 307-322]
  • COMFAR Techno-economic operation optimization of a HRSG in combined cycle power plants based on evolutionary algorithms: A case study of Yazd, Iran [Volume 7, Issue 1, 2019, Pages 67-79]
  • Compensating Voltage Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Compression Ignition Engine Combustion and exergy investigation of a compression ignition engine fueled with ethanol and methanol blends [Volume 9, Issue 2, 2021, Pages 159-172]
  • Compression Refrigeration Cycle Multi-objective optimization of compression refrigeration cycle of Unit 132 South Pars refineries [Volume 4, Issue 2, 2016, Pages 147-160]
  • Compressor Map The required power of the MGT-40 gas turbine starter [Volume 3, Issue 2, 2015, Pages 137-142]
  • Compressor Stations Optimization of energy consumption and offering a procedure for cooling gas compression facilities at gas compression stations [Volume 3, Issue 2, 2015, Pages 113-124]
  • Computational fluid dynamics A numerical study of the effect of channel spacers on the performance of cross-flow forward osmosis membrane modules [Volume 8, Issue 3, 2020, Pages 237-251]
  • Computational fluid dynamics Numerical modeling of particles resuspension due to human stepping [Volume 10, Issue 4, 2022, Pages 401-415]
  • Concentrating Photovoltaic Thermal Energy and environmental performance of a grid-connected concentrating photovoltaic thermal system for residential buildings in Iran [Volume 9, Issue 2, 2021, Pages 173-190]
  • Concentrating Photovoltaic Thermal Application of artificial neural network for prediction of energy flow in wheat production based on mechanization development approach [Volume 9, Issue 2, 2021, Pages 191-207]
  • Conical and Helical Coiled Tubes Comparison of convective heat transfer of turbulent nanofluid flow through helical and conical coiled tubes [Volume 7, Issue 1, 2019, Pages 11-22]
  • Conical Collector Theoretical and experimental investigation into incident radiation on solar conical collector [Volume 4, Issue 2, 2016, Pages 123-132]
  • Conical Spiral Ducts Nanoparticle addition and path-curvature-effect on heat transfer in a typical conical spiral duct with a square cross-section [Volume 10, Issue 3, 2022, Pages 287-308]
  • Constant Flow A method for bubble volume measurement under constant flow conditions in gas–liquid two-phase flow [Volume 6, Issue 1, 2018, Pages 89-99]
  • Contact angle Motion dynamics of a water drop located on a hydrophobic inclined surface under uniform airflow [Volume 10, Issue 3, 2022, Pages 215-227]
  • Control Development of a compression system dynamic simulation code for testing and designing of anti-surge control system [Volume 7, Issue 2, 2019, Pages 99-110]
  • Convolutional Neural Networks (CNN) Convolutional neural networks for wind turbine gearbox health monitoring [Volume 10, Issue 1, 2022, Pages 73-82]
  • Cooling Cycle Experimental comparison of internal and external condensers effect on the energy consumption of household refrigerators [Volume 10, Issue 1, 2022, Pages 13-26]
  • Coordinated Control Coordinated control of hybrid AC/DC microgrids including PV and storage systems [Volume 9, Issue 4, 2021, Pages 307-316]
  • Cost Assessment Modeling, analyses, and assessment of a liquid air energy storage (LAES) system [Volume 9, Issue 3, 2021, Pages 249-260]
  • Cost Benefit Analysis A mixed integer nonlinear programming model for optimizing a gas pipeline transmission linear network [Volume 6, Issue 4, 2018, Pages 351-366]
  • Cost of Electricity Techno-Econo-Environmental study on the use of domestic-scale wind turbines in Iran [Volume 7, Issue 4, 2019, Pages 317-338]
  • Cost Of Energy (COE) Aerodynamic optimization of a 5 Megawatt wind turbine blade [Volume 4, Issue 2, 2016, Pages 133-145]
  • COVID-19 Impact of covid-19 on biofuels global market and their utilization necessity during pandemic [Volume 9, Issue 4, 2021, Pages 371-382]
  • Cumulative Energy Demand Applying data envelopment analysis (DEA) to improve energy efficiency of apple fruit, focusing on cumulative energy demand [Volume 9, Issue 1, 2021, Pages 37-52]
  • Cutting Force Fluctuation Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel [Volume 9, Issue 2, 2021, Pages 145-158]

D

  • Data Envelopment Analysis Applying data envelopment analysis (DEA) to improve energy efficiency of apple fruit, focusing on cumulative energy demand [Volume 9, Issue 1, 2021, Pages 37-52]
  • Data Envelopment Analysis (DEA) The location optimization of wind turbine sites with using the MCDM approach: A case study [Volume 5, Issue 2, 2017, Pages 165-187]
  • Daylight Energy consumption of atria; the case of a commercial-office center in the semi-arid climate of Tehran [Volume 7, Issue 3, 2019, Pages 211-234]
  • Daylighting Parametric study of skylight design parameters to improve the indoor visual quality in exhibition areas [Volume 11, Issue 1, 2023, Pages 1-11]
  • DC Offset Distance protection closed-loop testing using RTDS [Volume 5, Issue 2, 2017, Pages 197-210]
  • Decision-Making Procedure Energy auditing in cement industry: A case study [Volume 2, Issue 2, 2014, Pages 171-184]
  • Deep Neural Network Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
  • Deep Neural Network Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations [Volume 8, Issue 1, 2020, Pages 91-102]
  • Desalination A thermodynamic model for exergetic performance and optimization of a solar and biomass-fuelled multigeneration system [Volume 4, Issue 2, 2016, Pages 281-289]
  • Desalination Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis [Volume 5, Issue 4, 2017, Pages 419-430]
  • Desalination Thermodynamic diagnosis of a novel solar-biomass based multi-generation system including potable water and hydrogen production [Volume 7, Issue 1, 2019, Pages 81-98]
  • Desalination Thermo-economic analysis and optimization of a novel combination of the solar tower power plant, Stirling engine, Reverse osmosis desalination, and proton exchange membrane electrolyzer [Volume 9, Issue 4, 2021, Pages 331-349]
  • Desalination Simulation and exergy evaluation of a MED unit based on waste heat recovery from a gas turbine unit [Volume 10, Issue 3, 2022, Pages 229-239]
  • DesignBuilder Study of thermal performance of building roofs in the city of Tehran [Volume 6, Issue 3, 2018, Pages 305-315]
  • DesignBuilder Toward the design of zero energy buildings (ZEB) in Iran: Climatic study [Volume 7, Issue 2, 2019, Pages 111-119]
  • Detent Force Optimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force [Volume 5, Issue 1, 2017, Pages 1-11]
  • Dew point An analytic model of membrane humidifier for proton exchange membrane fuel cell [Volume 2, Issue 1, 2014, Pages 83-94]
  • Dezful Sensitivity analysis and energy optimization in residential complex in warm and semi-humid climates of Iran (Dezful) [Volume 9, Issue 1, 2021, Pages 71-90]
  • DFIG Analysis and simulation of dynamic performance for DFIG-based wind farm connected to a distrubition system [Volume 6, Issue 2, 2018, Pages 117-130]
  • DFIG Damping analysis of sub-synchronous resonance (SSR) in a wind farm based on DFIG in a series compensated network [Volume 6, Issue 4, 2018, Pages 381-392]
  • Diesel engine The effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine [Volume 5, Issue 1, 2017, Pages 59-69]
  • Diesel Fuel Energy use efficiency, GHG emissions, and carbon efficiency of paddy rice production in Iran [Volume 4, Issue 2, 2016, Pages 169-176]
  • Diesel Fuel Techno-Econo-Environmental study on the use of domestic-scale wind turbines in Iran [Volume 7, Issue 4, 2019, Pages 317-338]
  • Differential Evolution Algorithm Xergy analysis and multiobjective optimization of a biomass gasification-based multigeneration system [Volume 6, Issue 1, 2018, Pages 69-87]
  • Dimensional parameters An analytic model of membrane humidifier for proton exchange membrane fuel cell [Volume 2, Issue 1, 2014, Pages 83-94]
  • Distance Protection Distance protection closed-loop testing using RTDS [Volume 5, Issue 2, 2017, Pages 197-210]
  • Distributed Model Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate [Volume 8, Issue 4, 2020, Pages 339-348]
  • DOM Combined mixed convection and radiation simulation of inclined lid driven cavity [Volume 6, Issue 3, 2018, Pages 261-277]
  • DOM Interaction of laminar natural convection and radiation in an inclined square cavity containing participating gases [Volume 8, Issue 2, 2020, Pages 111-126]
  • Doubled-Row VAWT Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
  • Double Effect Absorption Chiller Thermodynamic diagnosis of a novel solar-biomass based multi-generation system including potable water and hydrogen production [Volume 7, Issue 1, 2019, Pages 81-98]
  • Double Effect LiBr-H2O Thermoeconomic analysis of a hybrid PVT solar system integrated with double effect absorption chiller for cooling/hydrogen production [Volume 6, Issue 4, 2018, Pages 413-427]
  • Double Pass SAH Numerical investigation on the performance of double pass two glazed solar air heaters with jet impingement [Volume 11, Issue 1, 2023, Pages 13-28]
  • Double-Pass Solar Air Heater Numerical investigation on thermal performance enhancement of a flat-plate natural flow double-pass solar air heater – The effect of the absorber plate [Volume 10, Issue 4, 2022, Pages 353-374]
  • Double-Sided The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system [Volume 5, Issue 4, 2017, Pages 401-409]
  • Doubly Fed Induction Generator Active and reactive power control via currents of a rotor’s d and q components with nonlinear predictive control strategy in a doubly fed induction generator based on wind power system [Volume 3, Issue 2, 2015, Pages 143-157]
  • Doubly Fed Induction Generator Improving the performance of wind turbine equipped with DFIG using STATCOM based on input-output feedback linearization controller [Volume 4, Issue 1, 2016, Pages 65-79]
  • Doubly Fed Induction Generator (DFIG) Novel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant [Volume 5, Issue 1, 2017, Pages 43-58]
  • Drag coefficient Drag coefficient and strouhal number analysis of a rectangular probe in a two-phase cross flow [Volume 6, Issue 1, 2018, Pages 7-15]
  • Dressing Experimental investigation of the effects of dressing and coolant-lubricant conditions on grinding of Nickel-based superalloy-Inconel 738 [Volume 9, Issue 1, 2021, Pages 27-36]
  • Dressing Experimental investigation of the effect of single point dressing parameters on grinding of Mo40 hardened steel using mounted point grinding tool [Volume 10, Issue 2, 2022, Pages 197-214]
  • Drop Motion dynamics of a water drop located on a hydrophobic inclined surface under uniform airflow [Volume 10, Issue 3, 2022, Pages 215-227]
  • DTMB4119 Propeller Numerical simulation of turbulent flow around the dtmb4119 propeller in open water conditions [Volume 6, Issue 1, 2018, Pages 39-49]
  • Dual-Nozzle Ejector Exergy, exergoeconomic and exergoenvironmental studies and optimization of a novel triple-evaporator refrigeration cycle with dual-nozzle ejector using low GWP refrigerants [Volume 8, Issue 1, 2020, Pages 23-44]
  • Dual-Pipe An overview on the thermal performance of dual-tube heat exchangers in the presence of nanofluids [Volume 11, Issue 1, 2023, Pages 69-94]
  • Ductile cast iron A review on fatigue design of heavy section EN-GJS-400-18-LT ductile iron wind turbine castings [Volume 2, Issue 1, 2014, Pages 5-24]
  • Dynamic Development of a compression system dynamic simulation code for testing and designing of anti-surge control system [Volume 7, Issue 2, 2019, Pages 99-110]
  • Dynamical Governing Equations Parametric study of a novel oscillatory wind turbine [Volume 7, Issue 4, 2019, Pages 377-387]
  • Dynamic mesh Numerical modeling of particles resuspension due to human stepping [Volume 10, Issue 4, 2022, Pages 401-415]
  • Dynamic Performance Analysis and simulation of dynamic performance for DFIG-based wind farm connected to a distrubition system [Volume 6, Issue 2, 2018, Pages 117-130]
  • Dynamic simulation Dynamic simulation of a qanat source heat pump in different climatic conditions [Volume 10, Issue 3, 2022, Pages 309-326]
  • Dynamic simulation Transient simulation and 4E Analyses of a hybrid renewable energy system for an educational building [Volume 11, Issue 2, 2023, Pages 123-144]
  • Dynamometer Numerical simulation of incompressible turbulent flow in shrouded disk system with radial outflow [Volume 7, Issue 1, 2019, Pages 1-10]

E

  • East Azerbaijan Network of Iran Measurements and parameters estimation in power systems containing UPFC [Volume 10, Issue 1, 2022, Pages 1-11]
  • ECAP Experimental investigation of the effects of cutting parameters on machinability of ECAP-processed ultrafine-grained copper using tungsten carbide cutting tools [Volume 10, Issue 3, 2022, Pages 241-254]
  • Ecologicost Optimization and analysis of exergy, economic and environmental of gas turbine (Case study: Kerman plant combined cycle) [Volume 10, Issue 2, 2022, Pages 101-121]
  • Economical evaluation Aerodynamic design and economical evaluation of site specific horizontal axis wind turbine (HAWT) [Volume 2, Issue 1, 2014, Pages 43-56]
  • Economic Analysis A feasibility study and economic analysis for application of nanofluids in waste heat recovery [Volume 4, Issue 2, 2016, Pages 205-214]
  • Economic Analysis Economic optimization of solar systems in uncertain economic conditions using the Monte Carlo method [Volume 5, Issue 3, 2017, Pages 313-323]
  • Economic Analysis Economic optimization and comparative study of solar heat pumps [Volume 6, Issue 3, 2018, Pages 279-292]
  • Economic Analysis Comparative performance assessment of flat plate and evacuated tube collectors for domestic water heating systems in Kerman, Iran [Volume 8, Issue 2, 2020, Pages 143-152]
  • Economic Analysis Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage [Volume 8, Issue 3, 2020, Pages 217-235]
  • Economic Analysis Thermo-economic analysis and optimization of a novel combination of the solar tower power plant, Stirling engine, Reverse osmosis desalination, and proton exchange membrane electrolyzer [Volume 9, Issue 4, 2021, Pages 331-349]
  • Economic Cvaluation Economic feasibility of small-scale gas to liquid technology in reducing flaring in Iran and case study of implementing the technology at the third South Pars refinery [Volume 9, Issue 4, 2021, Pages 317-330]
  • Economice Valuation Optimization of energy consumption and offering a procedure for cooling gas compression facilities at gas compression stations [Volume 3, Issue 2, 2015, Pages 113-124]
  • Economic Optimization Design and optimization of solar-assisted conveyer-belt dryer for biomass [Volume 5, Issue 2, 2017, Pages 85-94]
  • Economizer Study on performance and methods to optimize thermal oil boiler efficiency in cement industry [Volume 4, Issue 1, 2016, Pages 53-64]
  • Eefficiency Experimental investigation of heat transfer, pressure drop, and efficiency of TiO2/Oil nanofluid in alternating flattened tubes [Volume 10, Issue 2, 2022, Pages 123-136]
  • Effectiveness Film cooling simulation on an entire gas turbine blade with square pulsed coolant injection [Volume 8, Issue 4, 2020, Pages 367-388]
  • Efficiency Analysis of micro-recuperators in small-sized gas turbines –manufacturing potential of Iran [Volume 3, Issue 1, 2015, Pages 1-12]
  • Efficiency A review on recent applications of brushless DC electric machines and their potential in energy saving [Volume 3, Issue 1, 2015, Pages 57-71]
  • Efficiency Effect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance [Volume 7, Issue 2, 2019, Pages 133-147]
  • Efficiency Investigation of convective heat transfer, pressure drop and efficiency of ZnO/water nanofluid in alternating elliptical axis tubes [Volume 8, Issue 3, 2020, Pages 203-215]
  • Efficiency Evaluation of the optimum pressures of gas turbines based on energy and exergy analyses [Volume 10, Issue 2, 2022, Pages 169-181]
  • Efficiency Fabrication and assessment of a parabolic dish con-centrator using a water heater cylindrical receiver [Volume 11, Issue 1, 2023, Pages 55-68]
  • Efficiency Study on heat transfer, pressure drop and efficiency of ZnO/Oil nanofluid in a novel hexagonal tube [Volume 11, Issue 2, 2023, Pages 247-259]
  • EGR Proposal of a novel ammonia brayton cycle integrated with a methane/hydrogen brayton cycle; Thermodynamic and environmental impacts assessments [Volume 11, Issue 1, 2023, Pages 95-122]
  • Ejector The energy and exergy analysis of a novel cogeneration organic Rankine power and two-stage compression refrigeration cycle [Volume 5, Issue 3, 2017, Pages 299-312]
  • Ejector Refrigeration Fycle (ERC) Theoretical analysis of a novel combined cooling, heating, and power (CCHP) cycle [Volume 5, Issue 3, 2017, Pages 241-249]
  • Electrical efficiency Thermoeconomic comparison between the performance of small-scale internal combustion engines and gas turbines integrated with a biomass gasifier [Volume 2, Issue 1, 2014, Pages 57-82]
  • Electricity Enhancers of the energy efficiency in tea processing industry [Volume 6, Issue 2, 2018, Pages 201-209]
  • Electricity Green cottage power supply and floating solar power plant: A Techno-Economic analysis [Volume 10, Issue 4, 2022, Pages 375-388]
  • Electric Machine A review on recent applications of brushless DC electric machines and their potential in energy saving [Volume 3, Issue 1, 2015, Pages 57-71]
  • Electric Submersible Pump (ESP) The parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition [Volume 3, Issue 1, 2015, Pages 33-44]
  • Electrochemical Systems The effect of the linear method on electrochemical impedance spectroscopy calculation in the time domain under the noise condition [Volume 11, Issue 1, 2023, Pages 29-42]
  • Electrochromic Window Simulation-based optimization of smart windows performance using coupled EnergyPlus - NSGA-II - ANP method [Volume 9, Issue 1, 2021, Pages 1-13]
  • EMALS The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system [Volume 5, Issue 4, 2017, Pages 401-409]
  • Emission reduction The use of waste heat recovery (WHR) options to produce electricity, heating, cooling, and freshwater for residential buildings [Volume 8, Issue 3, 2020, Pages 277-296]
  • EMTP-RV Analysis of effective factors on transient ground potential rise in gas insulated substations [Volume 3, Issue 2, 2015, Pages 125-136]
  • Energy Analysis Investigation of a single-reheat condensing steam power plant based on energy and exergy analysis [Volume 2, Issue 2, 2014, Pages 155-170]
  • Energy Analysis Energy flow modeling of broiler production in Guilan province of Iran [Volume 5, Issue 4, 2017, Pages 411-418]
  • Energy Analysis The development and assessment of solar-driven Tri-generation system energy and optimization of criteria comparison [Volume 6, Issue 4, 2018, Pages 367-379]
  • Energy Analysis Energy, exergy and environmental analyses of a trigeneration system with power generation units of solid oxide fuel cell and solar panels [Volume 10, Issue 4, 2022, Pages 417-437]
  • Energy Audit Energy auditing in cement industry: A case study [Volume 2, Issue 2, 2014, Pages 171-184]
  • Energy Audit Comparison of energy consumption and greenhouse gas emission footprint caused by agricultural products in greenhouses and open field in Iran [Volume 5, Issue 2, 2017, Pages 157-163]
  • Energy Balance The effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine [Volume 5, Issue 1, 2017, Pages 59-69]
  • Energy Budget Theoretical analysis of reservoir-based floating photovoltaic plant for 15-khordad dam in Delijan [Volume 5, Issue 2, 2017, Pages 211-218]
  • Energy Efficiency Comparison of energy consumption and greenhouse gas emission footprint caused by agricultural products in greenhouses and open field in Iran [Volume 5, Issue 2, 2017, Pages 157-163]
  • Energy Efficiency Thermodynamic analysis of a novel solar water heating system during low sun radiation in Iran [Volume 6, Issue 3, 2018, Pages 317-327]
  • Energy Efficiency Net zero energy buildings in semi-arid climates: An analysis on 3 case studies in Tehran, Iran [Volume 8, Issue 2, 2020, Pages 169-178]
  • Energy Efficiency Thermodynamic assessment and proposal of new configurations of an indirect water bath heater for a City Gate Station (a case study) [Volume 8, Issue 4, 2020, Pages 349-365]
  • Energy Enterprise A new approach for performance evaluation of energy-related enterprises [Volume 6, Issue 1, 2018, Pages 16-26]
  • Energy-Food-Water Nexus The food-energy-water nexus: A framework for sustainable development modeling [Volume 8, Issue 2, 2020, Pages 179-201]
  • Energy Grade Experimental comparison of internal and external condensers effect on the energy consumption of household refrigerators [Volume 10, Issue 1, 2022, Pages 13-26]
  • Energy Harvesting Development of a laboratory system to investigate and store electrical energy from the vibrations of a piezoelectric beam [Volume 4, Issue 2, 2016, Pages 161-168]
  • Energy hub Design and optimization of an energy hub based on combined cycle power plant to improve economic and exergy objectives [Volume 8, Issue 1, 2020, Pages 1-22]
  • Energy Indices Applying data envelopment analysis (DEA) to improve energy efficiency of apple fruit, focusing on cumulative energy demand [Volume 9, Issue 1, 2021, Pages 37-52]
  • Energy Management System (EMS) Proposing a quantitative approach to measure the success of energy management systems in accordance with ISO 50001: 2011 using an analytical hierarchy process (AHP) [Volume 5, Issue 4, 2017, Pages 349-355]
  • Energy Optimization Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
  • Energy Optimization Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations [Volume 8, Issue 1, 2020, Pages 91-102]
  • Energy Optimization Sensitivity analysis and energy optimization in residential complex in warm and semi-humid climates of Iran (Dezful) [Volume 9, Issue 1, 2021, Pages 71-90]
  • Energy Payback Time Significant factors for enhancing the life cycle assessment of photovoltaic thermal air collector [Volume 7, Issue 2, 2019, Pages 175-197]
  • Energy Performance Analysis Comparative performance assessment of flat plate and evacuated tube collectors for domestic water heating systems in Kerman, Iran [Volume 8, Issue 2, 2020, Pages 143-152]
  • EnergyPlus On the effect of using phase change materials in energy consumption and CO2 emission in buildings in Iran: a climatic and parametric study [Volume 3, Issue 2, 2015, Pages 73-81]
  • EnergyPlus Simulation-based optimization of smart windows performance using coupled EnergyPlus - NSGA-II - ANP method [Volume 9, Issue 1, 2021, Pages 1-13]
  • Energy Production Valorization of municipal solid wastes through biogas production in Iran [Volume 7, Issue 1, 2019, Pages 57-65]
  • Energy Production Factor Significant factors for enhancing the life cycle assessment of photovoltaic thermal air collector [Volume 7, Issue 2, 2019, Pages 175-197]
  • Energy Productivity Energy input-output analysis under different farm sizes of forage maize cultivation in the Varamin region [Volume 9, Issue 2, 2021, Pages 117-125]
  • Energy Recovery Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer [Volume 5, Issue 4, 2017, Pages 341-348]
  • Energy-Saving Method On the effect of using phase change materials in energy consumption and CO2 emission in buildings in Iran: a climatic and parametric study [Volume 3, Issue 2, 2015, Pages 73-81]
  • Energy Simulation Energy consumption of atria; the case of a commercial-office center in the semi-arid climate of Tehran [Volume 7, Issue 3, 2019, Pages 211-234]
  • Energy Storage Review, analysis and simulation of different structures for hybrid electrical energy storages [Volume 5, Issue 2, 2017, Pages 115-129]
  • Energy Storage An experimental investigation on the energy storage in a shape-memory-polymer system [Volume 7, Issue 4, 2019, Pages 309-316]
  • Energy Use Efficiency Application of ANFIS and linear regression models to analyze the energy and economics of lentil and chickpea production in Iran [Volume 4, Issue 2, 2016, Pages 255-270]
  • Energy Use Efficiency Enhancers of the energy efficiency in tea processing industry [Volume 6, Issue 2, 2018, Pages 201-209]
  • Energy Use Efficiency Energy input-output analysis under different farm sizes of forage maize cultivation in the Varamin region [Volume 9, Issue 2, 2021, Pages 117-125]
  • EN-GJS-400-18-LT A review on fatigue design of heavy section EN-GJS-400-18-LT ductile iron wind turbine castings [Volume 2, Issue 1, 2014, Pages 5-24]
  • Entransy Theory Comparison of entropy generation minimization principle and entransy theory in optimal design of thermal systems [Volume 6, Issue 3, 2018, Pages 329-336]
  • Entropy Investigation of thermal performance and entropy generation in a microchannel heatsink with a wavy channel using bio nanofluid [Volume 10, Issue 1, 2022, Pages 27-40]
  • Entropy generation Comparison of entropy generation minimization principle and entransy theory in optimal design of thermal systems [Volume 6, Issue 3, 2018, Pages 329-336]
  • Entropy generation Heat transfer and entropy generation of power-law fluids natural convection inside triangular cavity; The effect of angle and type of magnetic field applied [Volume 10, Issue 4, 2022, Pages 327-352]
  • Environmental analysis Energy, exergy and environmental analyses of a trigeneration system with power generation units of solid oxide fuel cell and solar panels [Volume 10, Issue 4, 2022, Pages 417-437]
  • Environmental Benefits Developing off-design model of Yazd integrated solar combined cycle for analyzing environmental benefits of using solar energy instead of supplementary firing [Volume 6, Issue 4, 2018, Pages 429-448]
  • Environmental Impacts Valorization of municipal solid wastes through biogas production in Iran [Volume 7, Issue 1, 2019, Pages 57-65]
  • Environmental Impacts Net zero energy buildings in semi-arid climates: An analysis on 3 case studies in Tehran, Iran [Volume 8, Issue 2, 2020, Pages 169-178]
  • Environmentally Friendly Machining Experimental investigation of the effect of single point dressing parameters on grinding of Mo40 hardened steel using mounted point grinding tool [Volume 10, Issue 2, 2022, Pages 197-214]
  • Environmental management Energy use efficiency, GHG emissions, and carbon efficiency of paddy rice production in Iran [Volume 4, Issue 2, 2016, Pages 169-176]
  • Environmental Pollutants The investigation of performance and emission of a gasoline engine using novel gasoline and bio-alcohols fuel blends [Volume 11, Issue 2, 2023, Pages 145-163]
  • Environmental temperature Numerical study on the performance of a glazed photovoltaic thermal system integrated with phase change material (GPVT/PCM): on the contribution of PCM volumetric fraction and environmental temperature [Volume 10, Issue 2, 2022, Pages 137-168]
  • Equivalence ratio Proposal of a novel ammonia brayton cycle integrated with a methane/hydrogen brayton cycle; Thermodynamic and environmental impacts assessments [Volume 11, Issue 1, 2023, Pages 95-122]
  • Ethanol Combustion and exergy investigation of a compression ignition engine fueled with ethanol and methanol blends [Volume 9, Issue 2, 2021, Pages 159-172]
  • Eulerian model Simulation of gas-liquid two phase flow in upriser pipe of gas-lift systems [Volume 2, Issue 1, 2014, Pages 25-42]
  • Evacuated Tube Collector Comparative performance assessment of flat plate and evacuated tube collectors for domestic water heating systems in Kerman, Iran [Volume 8, Issue 2, 2020, Pages 143-152]
  • Excess Air Study on performance and methods to optimize thermal oil boiler efficiency in cement industry [Volume 4, Issue 1, 2016, Pages 53-64]
  • Excess Air Thermodynamic assessment and proposal of new configurations of an indirect water bath heater for a City Gate Station (a case study) [Volume 8, Issue 4, 2020, Pages 349-365]
  • Exergoeconomic Exergoeconomic analysis and genetic algorithm power optimization of an irreversible regenerative Brayton cycle [Volume 4, Issue 2, 2016, Pages 188-203]
  • Exergoeconomic Thermoeconomic analysis of a hybrid PVT solar system integrated with double effect absorption chiller for cooling/hydrogen production [Volume 6, Issue 4, 2018, Pages 413-427]
  • Exergoeconomic Enhanced performance and reduced payback period of a low grade geothermal-based ORC through employing two TEGs [Volume 7, Issue 1, 2019, Pages 23-39]
  • Exergoeconomic Analysis Exergy, exergoeconomic and exergoenvironmental studies and optimization of a novel triple-evaporator refrigeration cycle with dual-nozzle ejector using low GWP refrigerants [Volume 8, Issue 1, 2020, Pages 23-44]
  • Exergo-Economic Analysis Exergo-environmental and exergo-economic analyses and multi-criteria optimization of a novel solar-driven CCHP based on Kalina cycle [Volume 4, Issue 2, 2016, Pages 225-244]
  • Exergoenvironmental Analysis Exergy, exergoeconomic and exergoenvironmental studies and optimization of a novel triple-evaporator refrigeration cycle with dual-nozzle ejector using low GWP refrigerants [Volume 8, Issue 1, 2020, Pages 23-44]
  • Exergo-Environmental Analysis Exergo-environmental and exergo-economic analyses and multi-criteria optimization of a novel solar-driven CCHP based on Kalina cycle [Volume 4, Issue 2, 2016, Pages 225-244]
  • Exergy Thermoeconomic optimization and exergy analysis of transcritical CO2 refrigeration cycle with an ejector [Volume 4, Issue 1, 2016, Pages 43-52]
  • Exergy The energy and exergy analysis of a novel cogeneration organic Rankine power and two-stage compression refrigeration cycle [Volume 5, Issue 3, 2017, Pages 299-312]
  • Exergy Enhanced performance and reduced payback period of a low grade geothermal-based ORC through employing two TEGs [Volume 7, Issue 1, 2019, Pages 23-39]
  • Exergy Thermodynamic diagnosis of a novel solar-biomass based multi-generation system including potable water and hydrogen production [Volume 7, Issue 1, 2019, Pages 81-98]
  • Exergy Evaluation of the optimum pressures of gas turbines based on energy and exergy analyses [Volume 10, Issue 2, 2022, Pages 169-181]
  • Exergy Simulation and exergy evaluation of a MED unit based on waste heat recovery from a gas turbine unit [Volume 10, Issue 3, 2022, Pages 229-239]
  • Exergy Analysis Investigation of a single-reheat condensing steam power plant based on energy and exergy analysis [Volume 2, Issue 2, 2014, Pages 155-170]
  • Exergy Analysis Exergo-environmental and exergo-economic analyses and multi-criteria optimization of a novel solar-driven CCHP based on Kalina cycle [Volume 4, Issue 2, 2016, Pages 225-244]
  • Exergy Analysis Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis [Volume 5, Issue 4, 2017, Pages 419-430]
  • Exergy Analysis Xergy analysis and multiobjective optimization of a biomass gasification-based multigeneration system [Volume 6, Issue 1, 2018, Pages 69-87]
  • Exergy Analysis Mini two-shaft gas turbine exergy analysis with a proposal to decrease exergy destruction [Volume 6, Issue 2, 2018, Pages 131-141]
  • Exergy Analysis The development and assessment of solar-driven Tri-generation system energy and optimization of criteria comparison [Volume 6, Issue 4, 2018, Pages 367-379]
  • Exergy Analysis Combustion and exergy investigation of a compression ignition engine fueled with ethanol and methanol blends [Volume 9, Issue 2, 2021, Pages 159-172]
  • Exergy Analysis Modeling, analyses, and assessment of a liquid air energy storage (LAES) system [Volume 9, Issue 3, 2021, Pages 249-260]
  • Exergy Analysis Thermo-economic analysis and optimization of a novel combination of the solar tower power plant, Stirling engine, Reverse osmosis desalination, and proton exchange membrane electrolyzer [Volume 9, Issue 4, 2021, Pages 331-349]
  • Exergy Analysis Optimization and analysis of exergy, economic and environmental of gas turbine (Case study: Kerman plant combined cycle) [Volume 10, Issue 2, 2022, Pages 101-121]
  • Exergy Efficiency Thermodynamic analysis of a novel solar water heating system during low sun radiation in Iran [Volume 6, Issue 3, 2018, Pages 317-327]
  • Exergy Efficiency Use of solar radiation to produce cold water for hospital air conditioning system using the combined organic Rankine-vapor compression cycle [Volume 9, Issue 1, 2021, Pages 53-69]
  • Exergy Recovery Mini two-shaft gas turbine exergy analysis with a proposal to decrease exergy destruction [Volume 6, Issue 2, 2018, Pages 131-141]
  • Experimental Correlation Investigation with rheological behavior of liquid paraffin/Al2O3 nanofluid: Experimental approach [Volume 7, Issue 2, 2019, Pages 149-158]
  • Experimental Investigation Theoretical and experimental investigation into incident radiation on solar conical collector [Volume 4, Issue 2, 2016, Pages 123-132]
  • External Condenser Experimental comparison of internal and external condensers effect on the energy consumption of household refrigerators [Volume 10, Issue 1, 2022, Pages 13-26]

F

  • Farm size Energy input-output analysis under different farm sizes of forage maize cultivation in the Varamin region [Volume 9, Issue 2, 2021, Pages 117-125]
  • Fars province The location optimization of wind turbine sites with using the MCDM approach: A case study [Volume 5, Issue 2, 2017, Pages 165-187]
  • FAST ANFIS modeling and validation of a variable speed wind turbine based on actual data [Volume 7, Issue 3, 2019, Pages 249-262]
  • Fatigue design A review on fatigue design of heavy section EN-GJS-400-18-LT ductile iron wind turbine castings [Volume 2, Issue 1, 2014, Pages 5-24]
  • Fault Detection and Isolation Fault detection and isolation of wind turbine gearbox via noise-assisted multivariate empirical mode decomposition algorithm [Volume 10, Issue 3, 2022, Pages 271-286]
  • Fault Ride Through Damping sub-synchronous resonance and improving fault ride through capability: Using S.T.A.T.C.O.M. and S.D.B.R. in a wind power system [Volume 8, Issue 4, 2020, Pages 323-338]
  • Faulty Conditions Simultaneous power sharing and protection against faults for DGs in microgrid with different loads [Volume 7, Issue 3, 2019, Pages 279-295]
  • FEA The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system [Volume 5, Issue 4, 2017, Pages 401-409]
  • FE Computation Electromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method [Volume 5, Issue 3, 2017, Pages 227-240]
  • Feed Water Heater The optimum pressure for working fluid in feed water heaters of steam power plants [Volume 4, Issue 2, 2016, Pages 245-253]
  • FEM Optimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force [Volume 5, Issue 1, 2017, Pages 1-11]
  • FEW Nexus Modeling The food-energy-water nexus: A framework for sustainable development modeling [Volume 8, Issue 2, 2020, Pages 179-201]
  • Fiber Orientation Stochastic reconstruction of carbon fiber paper gas diffusion layers of PEFCs: A comparative study [Volume 6, Issue 1, 2018, Pages 51-59]
  • Film cooling Shape optimization of impingement and film cooling holes on a flat plate using a feedforward ANN and GA [Volume 6, Issue 3, 2018, Pages 247-259]
  • Film cooling Film cooling simulation on an entire gas turbine blade with square pulsed coolant injection [Volume 8, Issue 4, 2020, Pages 367-388]
  • Finite Control Set Model Predictive Control Power injection of renewable energy sources using modified model predictive control [Volume 4, Issue 2, 2016, Pages 215-224]
  • Finite elements method Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel [Volume 9, Issue 2, 2021, Pages 145-158]
  • Finite-Time Thermodynamic Exergoeconomic analysis and genetic algorithm power optimization of an irreversible regenerative Brayton cycle [Volume 4, Issue 2, 2016, Pages 188-203]
  • Fire Location Effect of Fire Location on the Smoke Temperature and CO Distributions in a Subway Tunnel with Train Carriages: A Numerical Study [Volume 11, Issue 2, 2023, Pages 231-246]
  • Flame Structure Large eddy simulation of propane combustion in a planar trapped vortex combustor [Volume 8, Issue 2, 2020, Pages 127-141]
  • Flare Gases Simulation and economic evaluation of heat and power generation from flare gases in a combined cycle power plant [Volume 8, Issue 4, 2020, Pages 307-322]
  • Flare Gas Recovery Economic feasibility of small-scale gas to liquid technology in reducing flaring in Iran and case study of implementing the technology at the third South Pars refinery [Volume 9, Issue 4, 2021, Pages 317-330]
  • Floating Photovoltaic Green cottage power supply and floating solar power plant: A Techno-Economic analysis [Volume 10, Issue 4, 2022, Pages 375-388]
  • Fluidized-Bed Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]
  • Fluid-solid interaction Fluid-solid interaction analysis of cantilever plate behind a fixed cylinder in parallel flow: Application to energy harvesters [Volume 11, Issue 1, 2023, Pages 43-53]
  • Fluid Structure Interaction A robust engineering approach for wind turbine blade profile aeroelastic computation [Volume 2, Issue 2, 2014, Pages 121-128]
  • Flywheel Review, analysis and simulation of different structures for hybrid electrical energy storages [Volume 5, Issue 2, 2017, Pages 115-129]
  • FMDF LES/FMDF of premixed methane/air flow in a backward-facing step combustor [Volume 7, Issue 2, 2019, Pages 159-173]
  • Forward osmosis A numerical study of the effect of channel spacers on the performance of cross-flow forward osmosis membrane modules [Volume 8, Issue 3, 2020, Pages 237-251]
  • Fouling Effects Simulation of fouling effects on a two-stage axial turbine performance [Volume 10, Issue 2, 2022, Pages 83-99]
  • FPVP Theoretical analysis of reservoir-based floating photovoltaic plant for 15-khordad dam in Delijan [Volume 5, Issue 2, 2017, Pages 211-218]
  • Frequency A method for bubble volume measurement under constant flow conditions in gas–liquid two-phase flow [Volume 6, Issue 1, 2018, Pages 89-99]
  • Freshwater The use of waste heat recovery (WHR) options to produce electricity, heating, cooling, and freshwater for residential buildings [Volume 8, Issue 3, 2020, Pages 277-296]
  • Freshwater, Heat Recovery Simulation and exergy evaluation of a MED unit based on waste heat recovery from a gas turbine unit [Volume 10, Issue 3, 2022, Pages 229-239]
  • Freundlich Isotherm A modified cellular automaton model for simulating ion dynamics in a Li-ion battery electrode [Volume 10, Issue 1, 2022, Pages 41-49]
  • FSI Numerical aeroelastic analysis of wind turbine NREL Phase VI Rotor [Volume 3, Issue 1, 2015, Pages 45-56]
  • Fuel Enhancers of the energy efficiency in tea processing industry [Volume 6, Issue 2, 2018, Pages 201-209]
  • Fuel cell The Effect of cathode Porosity on Solid Oxide Fuel Cell Performance [Volume 3, Issue 1, 2015, Pages 25-32]
  • Fuzzy Controller Improvement of perturb and observe method for maximum power point tracking in wind energy conversion system using fuzzy controller [Volume 4, Issue 2, 2016, Pages 111-122]

G

  • Gasifier Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]
  • Gas Insulated Substations Analysis of effective factors on transient ground potential rise in gas insulated substations [Volume 3, Issue 2, 2015, Pages 125-136]
  • Gasoline engine The investigation of performance and emission of a gasoline engine using novel gasoline and bio-alcohols fuel blends [Volume 11, Issue 2, 2023, Pages 145-163]
  • Gas Pipeline Experimental values for adjusting an automatic control valve in gas pipeline transportation [Volume 6, Issue 2, 2018, Pages 221-233]
  • Gas Turbine Thermoeconomic comparison between the performance of small-scale internal combustion engines and gas turbines integrated with a biomass gasifier [Volume 2, Issue 1, 2014, Pages 57-82]
  • Gas Turbine Analysis of micro-recuperators in small-sized gas turbines –manufacturing potential of Iran [Volume 3, Issue 1, 2015, Pages 1-12]
  • Gas Turbine Optimization of turbine blade cooling with the aim of overall turbine performance enhancement [Volume 5, Issue 1, 2017, Pages 71-83]
  • Gas Turbine 4E analysis and multi-objective optimization of gas turbine CCHP plant with variable ambient temperature [Volume 5, Issue 3, 2017, Pages 285-298]
  • Gas Turbine Mini two-shaft gas turbine exergy analysis with a proposal to decrease exergy destruction [Volume 6, Issue 2, 2018, Pages 131-141]
  • Gas Turbine Thermo-fluid simulation of the gas turbine performance based on the first law of thermodynamics [Volume 7, Issue 1, 2019, Pages 99-108]
  • Gas Turbine Cooling Shape optimization of impingement and film cooling holes on a flat plate using a feedforward ANN and GA [Volume 6, Issue 3, 2018, Pages 247-259]
  • Gas Turbine Starter The required power of the MGT-40 gas turbine starter [Volume 3, Issue 2, 2015, Pages 137-142]
  • GDL Reconstruction Stochastic reconstruction of carbon fiber paper gas diffusion layers of PEFCs: A comparative study [Volume 6, Issue 1, 2018, Pages 51-59]
  • Gearbox Condition Monitoring Convolutional neural networks for wind turbine gearbox health monitoring [Volume 10, Issue 1, 2022, Pages 73-82]
  • Genetic algorithm (GA) Aerodynamic optimization of a 5 Megawatt wind turbine blade [Volume 4, Issue 2, 2016, Pages 133-145]
  • Genetic algorithm (GA) Multi-objective optimization of compression refrigeration cycle of Unit 132 South Pars refineries [Volume 4, Issue 2, 2016, Pages 147-160]
  • Geometrical Modification Modification of pump as turbine as a soft pressure reduction systems (SPRS) for utilization in municipal water network [Volume 7, Issue 1, 2019, Pages 41-56]
  • Geothermal Enhanced performance and reduced payback period of a low grade geothermal-based ORC through employing two TEGs [Volume 7, Issue 1, 2019, Pages 23-39]
  • Geothermal Comparative analysis of a novel geothermal and nanofluid-based solar-driven multigeneration system integrated with high-temperature Kalina cycle: Energy, Exergy, and exergo-economics (3E) analysis [Volume 11, Issue 2, 2023, Pages 165-191]
  • Gibbs Reactor Simulation and modeling of hydrogen production from glucose biomass model compound via hydro-thermal gasification [Volume 6, Issue 2, 2018, Pages 211-219]
  • GIS Matlab simulation of solar panel MSX-64 at the best locations of Kermanshah province using GIS interpolation [Volume 4, Issue 1, 2016, Pages 21-30]
  • Glazed Photovoltaic Thermal System (GPVT) Numerical study on the performance of a glazed photovoltaic thermal system integrated with phase change material (GPVT/PCM): on the contribution of PCM volumetric fraction and environmental temperature [Volume 10, Issue 2, 2022, Pages 137-168]
  • Grashof Number Numerical study of natural convection heat transfer of Al2 O3/Water nanofluid in a Γ-shaped microchannel [Volume 6, Issue 2, 2018, Pages 143-154]
  • Gravitational Search Algorithm (GSA) Optimizing the AGC system of a three-unequal-area hydrothermal system based on evolutionary algorithms [Volume 6, Issue 1, 2018, Pages 101-116]
  • Green Cottages Green cottage power supply and floating solar power plant: A Techno-Economic analysis [Volume 10, Issue 4, 2022, Pages 375-388]
  • Greenhouse gases Economic assessment of solar-based hydrogen for methanol production [Volume 8, Issue 3, 2020, Pages 263-273]
  • Green Methanol Economic assessment of solar-based hydrogen for methanol production [Volume 8, Issue 3, 2020, Pages 263-273]
  • Grid-connected Energy and environmental performance of a grid-connected concentrating photovoltaic thermal system for residential buildings in Iran [Volume 9, Issue 2, 2021, Pages 173-190]
  • Grid-connected Application of artificial neural network for prediction of energy flow in wheat production based on mechanization development approach [Volume 9, Issue 2, 2021, Pages 191-207]
  • Grid Resolution Effect of grid resolution on NACA0012 self-noise prediction by large eddy simulation [Volume 10, Issue 4, 2022, Pages 389-399]
  • Grinding Experimental investigation of the effect of single point dressing parameters on grinding of Mo40 hardened steel using mounted point grinding tool [Volume 10, Issue 2, 2022, Pages 197-214]
  • Ground Source Heat Pump Determining the optimal size of a ground source heat pump within an air-conditioning system with economic and emission considerations [Volume 5, Issue 3, 2017, Pages 219-226]
  • Ground Source Heat Pumps System Design of a new hybrid windcatcher and ground source heat pump system [Volume 10, Issue 1, 2022, Pages 51-71]
  • GSC Controller Damping analysis of sub-synchronous resonance (SSR) in a wind farm based on DFIG in a series compensated network [Volume 6, Issue 4, 2018, Pages 381-392]

H

  • H-Darrieus Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
  • HDH System, Thermodynamic, Energetic, Exergetic Thermodynamic evaluation of a SOFC-based hybrid system integrated with HDH desalination unit [Volume 10, Issue 4, 2022, Pages 439-457]
  • Heat and Electricity Balance Energy auditing in cement industry: A case study [Volume 2, Issue 2, 2014, Pages 171-184]
  • Heat exchangers Nanoparticle addition and path-curvature-effect on heat transfer in a typical conical spiral duct with a square cross-section [Volume 10, Issue 3, 2022, Pages 287-308]
  • Heating Needed Energy Effects of supportive spaces and people on heating energy demand in cold climate in Iran [Volume 5, Issue 4, 2017, Pages 357-374]
  • Heat Pump Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer [Volume 5, Issue 4, 2017, Pages 341-348]
  • Heat Pump Cycle (HPC) Theoretical analysis of a novel combined cooling, heating, and power (CCHP) cycle [Volume 5, Issue 3, 2017, Pages 241-249]
  • Heat Recovery Nanofluid A feasibility study and economic analysis for application of nanofluids in waste heat recovery [Volume 4, Issue 2, 2016, Pages 205-214]
  • Heat Release Rate of Fire Effect of Fire Location on the Smoke Temperature and CO Distributions in a Subway Tunnel with Train Carriages: A Numerical Study [Volume 11, Issue 2, 2023, Pages 231-246]
  • Heatsink Improving the natural convective heat transfer of a rectangular heatsink using superhydrophobic walls: A numerical approach [Volume 6, Issue 3, 2018, Pages 293-303]
  • Heat Transfer Study of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells [Volume 6, Issue 4, 2018, Pages 393-412]
  • Heat Transfer Comparison of convective heat transfer of turbulent nanofluid flow through helical and conical coiled tubes [Volume 7, Issue 1, 2019, Pages 11-22]
  • Heat Transfer Thermal performance enhancement of automobile radiator using water-CuO nanofluid: an experimental study [Volume 7, Issue 3, 2019, Pages 235-248]
  • Heat Transfer Investigation of convective heat transfer, pressure drop and efficiency of ZnO/water nanofluid in alternating elliptical axis tubes [Volume 8, Issue 3, 2020, Pages 203-215]
  • Heat Transfer Experimental investigation of heat transfer, pressure drop, and efficiency of TiO2/Oil nanofluid in alternating flattened tubes [Volume 10, Issue 2, 2022, Pages 123-136]
  • Heat Transfer An overview on the thermal performance of dual-tube heat exchangers in the presence of nanofluids [Volume 11, Issue 1, 2023, Pages 69-94]
  • Heat Transfer Study on heat transfer, pressure drop and efficiency of ZnO/Oil nanofluid in a novel hexagonal tube [Volume 11, Issue 2, 2023, Pages 247-259]
  • Heat Transfer Analysis Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis [Volume 5, Issue 4, 2017, Pages 419-430]
  • Heat transfer coefficient Experimental study of nanofluid effects on heat transfer in closed cycle system in shell and tube heat exchangers at Isfahan power plant [Volume 4, Issue 2, 2016, Pages 95-109]
  • Heat transfer enhancement Numerical investigation on thermal performance enhancement of a flat-plate natural flow double-pass solar air heater – The effect of the absorber plate [Volume 10, Issue 4, 2022, Pages 353-374]
  • Helical Coil Heat Exchanger Dynamic simulation of a qanat source heat pump in different climatic conditions [Volume 10, Issue 3, 2022, Pages 309-326]
  • Hemisphere Surface Solar cell efficiency enhancement using a hemisphere texture containing metal nanostructures [Volume 8, Issue 2, 2020, Pages 103-110]
  • Home Appliance A review on recent applications of brushless DC electric machines and their potential in energy saving [Volume 3, Issue 1, 2015, Pages 57-71]
  • HOMER Software Comprehensive 3E analysis and optimization of off-grid renewable-based microgrids to meet the clinic energy demand, a case study for medical tourism [Volume 9, Issue 3, 2021, Pages 291-305]
  • Horizontal axis wind turbine (HAWT) Aerodynamic design and economical evaluation of site specific horizontal axis wind turbine (HAWT) [Volume 2, Issue 1, 2014, Pages 43-56]
  • Horizontal Reactor The development and evaluation of a portable polyethylene biogas reactor [Volume 6, Issue 1, 2018, Pages 61-68]
  • Hot climate Sensitivity analysis and energy optimization in residential complex in warm and semi-humid climates of Iran (Dezful) [Volume 9, Issue 1, 2021, Pages 71-90]
  • Hot Turning Towards sustainable machining of 17-4 PH stainless steel using hybrid MQL-hot turning process [Volume 7, Issue 4, 2019, Pages 339-352]
  • Hot Turning Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel [Volume 9, Issue 2, 2021, Pages 145-158]
  • HRSG Multi-objective optimization of heat recovery steam generators [Volume 2, Issue 2, 2014, Pages 129-140]
  • HVAC System Design and operation optimization of an air conditioning system through simulation: an hour-by-hour simulation study [Volume 6, Issue 2, 2018, Pages 155-165]
  • Hybrid AC/DC Microgrid Coordinated control of hybrid AC/DC microgrids including PV and storage systems [Volume 9, Issue 4, 2021, Pages 307-316]
  • Hybrid Energy System Development of a mathematical model to design an offshore wind and wave hybrid energy system [Volume 6, Issue 2, 2018, Pages 181-200]
  • Hybrid Machining Towards sustainable machining of 17-4 PH stainless steel using hybrid MQL-hot turning process [Volume 7, Issue 4, 2019, Pages 339-352]
  • Hybrid SOFC/GT The use of waste heat recovery (WHR) options to produce electricity, heating, cooling, and freshwater for residential buildings [Volume 8, Issue 3, 2020, Pages 277-296]
  • Hybrid Source Review, analysis and simulation of different structures for hybrid electrical energy storages [Volume 5, Issue 2, 2017, Pages 115-129]
  • Hybrid system Thermodynamic evaluation of a SOFC-based hybrid system integrated with HDH desalination unit [Volume 10, Issue 4, 2022, Pages 439-457]
  • Hydrodynamic Performance Numerical simulation of turbulent flow around the dtmb4119 propeller in open water conditions [Volume 6, Issue 1, 2018, Pages 39-49]
  • Hydrogen A numerical study on the effects of hydrogen addition levels, wall thermal conductivity and inlet velocity on methane/air pre-mixed flame in a micro reactor [Volume 2, Issue 2, 2014, Pages 103-119]
  • Hydrogen Simulation and modeling of hydrogen production from glucose biomass model compound via hydro-thermal gasification [Volume 6, Issue 2, 2018, Pages 211-219]
  • Hydrogen Cogeneration of power and hydrogen using Scramjet cooling system :Energy and exergy analyses [Volume 9, Issue 3, 2021, Pages 229-248]
  • Hydrogen production Thermodynamic diagnosis of a novel solar-biomass based multi-generation system including potable water and hydrogen production [Volume 7, Issue 1, 2019, Pages 81-98]
  • Hydrogen production Thermo-economic analysis and optimization of a novel combination of the solar tower power plant, Stirling engine, Reverse osmosis desalination, and proton exchange membrane electrolyzer [Volume 9, Issue 4, 2021, Pages 331-349]
  • Hydrophobicity Motion dynamics of a water drop located on a hydrophobic inclined surface under uniform airflow [Volume 10, Issue 3, 2022, Pages 215-227]
  • Hydropower Plant Modification of pump as turbine as a soft pressure reduction systems (SPRS) for utilization in municipal water network [Volume 7, Issue 1, 2019, Pages 41-56]

I

  • Imaging Time-Series Convolutional neural networks for wind turbine gearbox health monitoring [Volume 10, Issue 1, 2022, Pages 73-82]
  • Impedance The effect of the linear method on electrochemical impedance spectroscopy calculation in the time domain under the noise condition [Volume 11, Issue 1, 2023, Pages 29-42]
  • Impingement Cooling Shape optimization of impingement and film cooling holes on a flat plate using a feedforward ANN and GA [Volume 6, Issue 3, 2018, Pages 247-259]
  • Improved Aerodynamics Performance improvement of a wind turbine blade using a developed inverse design method [Volume 4, Issue 1, 2016, Pages 1-10]
  • Improvement Approaches Proposing a quantitative approach to measure the success of energy management systems in accordance with ISO 50001: 2011 using an analytical hierarchy process (AHP) [Volume 5, Issue 4, 2017, Pages 349-355]
  • Incident Radiation Theoretical and experimental investigation into incident radiation on solar conical collector [Volume 4, Issue 2, 2016, Pages 123-132]
  • Inclination Angle Combined mixed convection and radiation simulation of inclined lid driven cavity [Volume 6, Issue 3, 2018, Pages 261-277]
  • Inclined Annulus Numerical simulation of Al2O3–water nanofluid mixed convection in an inclined annulus [Volume 3, Issue 2, 2015, Pages 97-111]
  • Inclined Cavity Interaction of laminar natural convection and radiation in an inclined square cavity containing participating gases [Volume 8, Issue 2, 2020, Pages 111-126]
  • Inclined Surface Motion dynamics of a water drop located on a hydrophobic inclined surface under uniform airflow [Volume 10, Issue 3, 2022, Pages 215-227]
  • Incompressible Numerical simulation of incompressible turbulent flow in shrouded disk system with radial outflow [Volume 7, Issue 1, 2019, Pages 1-10]
  • Inconel 738 Experimental investigation of the effects of dressing and coolant-lubricant conditions on grinding of Nickel-based superalloy-Inconel 738 [Volume 9, Issue 1, 2021, Pages 27-36]
  • Indirect Water Bath Heater Thermodynamic assessment and proposal of new configurations of an indirect water bath heater for a City Gate Station (a case study) [Volume 8, Issue 4, 2020, Pages 349-365]
  • Indoor Air Conditions Design and operation optimization of an air conditioning system through simulation: an hour-by-hour simulation study [Volume 6, Issue 2, 2018, Pages 155-165]
  • Infiltrated Electrode An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes [Volume 5, Issue 3, 2017, Pages 251-264]
  • Injected Power A directional-based branches current method for transmission loss allocation in the pool-based electricity market [Volume 4, Issue 2, 2016, Pages 177-187]
  • Input-Output Feedback Linearization Controller Improving the performance of wind turbine equipped with DFIG using STATCOM based on input-output feedback linearization controller [Volume 4, Issue 1, 2016, Pages 65-79]
  • Integrated Solar Combined Cycle Developing off-design model of Yazd integrated solar combined cycle for analyzing environmental benefits of using solar energy instead of supplementary firing [Volume 6, Issue 4, 2018, Pages 429-448]
  • Integrated Solar Combined Cycle Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage [Volume 8, Issue 3, 2020, Pages 217-235]
  • Integration Proposal of a novel ammonia brayton cycle integrated with a methane/hydrogen brayton cycle; Thermodynamic and environmental impacts assessments [Volume 11, Issue 1, 2023, Pages 95-122]
  • Internal combustion engine Thermoeconomic comparison between the performance of small-scale internal combustion engines and gas turbines integrated with a biomass gasifier [Volume 2, Issue 1, 2014, Pages 57-82]
  • Internal Condenser Experimental comparison of internal and external condensers effect on the energy consumption of household refrigerators [Volume 10, Issue 1, 2022, Pages 13-26]
  • Internal Rate of Return Equipment capacity optimization of an educational building’s CCHP system by genetic algorithm and sensitivity analysis [Volume 5, Issue 4, 2017, Pages 375-387]
  • Interpolation Matlab simulation of solar panel MSX-64 at the best locations of Kermanshah province using GIS interpolation [Volume 4, Issue 1, 2016, Pages 21-30]
  • Inverter Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Iran Sensitivity analysis and energy optimization in residential complex in warm and semi-humid climates of Iran (Dezful) [Volume 9, Issue 1, 2021, Pages 71-90]
  • Irreversible Brayton Cycle Evaluation of the optimum pressures of gas turbines based on energy and exergy analyses [Volume 10, Issue 2, 2022, Pages 169-181]
  • ISO 50001: 2011 Proposing a quantitative approach to measure the success of energy management systems in accordance with ISO 50001: 2011 using an analytical hierarchy process (AHP) [Volume 5, Issue 4, 2017, Pages 349-355]
  • Isotropic Sky Model Theoretical and experimental investigation into incident radiation on solar conical collector [Volume 4, Issue 2, 2016, Pages 123-132]

J

  • Jet Impingement Numerical investigation on the performance of double pass two glazed solar air heaters with jet impingement [Volume 11, Issue 1, 2023, Pages 13-28]

K

  • Kalina Cycle Thermodynamic simulation and pinch analysis of KCS11 [Volume 5, Issue 2, 2017, Pages 131-145]

L

  • Laboratory System Development of a laboratory system to investigate and store electrical energy from the vibrations of a piezoelectric beam [Volume 4, Issue 2, 2016, Pages 161-168]
  • Labyrinth Performance evaluation of trapezoidal teeth labyrinth seal [Volume 5, Issue 3, 2017, Pages 265-273]
  • Laminar Numerical simulation of Al2O3–water nanofluid mixed convection in an inclined annulus [Volume 3, Issue 2, 2015, Pages 97-111]
  • Laminar Mixed Convection Flow Combined mixed convection and radiation simulation of inclined lid driven cavity [Volume 6, Issue 3, 2018, Pages 261-277]
  • Laminar Natural Convection Flow Interaction of laminar natural convection and radiation in an inclined square cavity containing participating gases [Volume 8, Issue 2, 2020, Pages 111-126]
  • Large Eddy Simulation Large eddy simulation of propane combustion in a planar trapped vortex combustor [Volume 8, Issue 2, 2020, Pages 127-141]
  • Large-Eddy Simulation Effect of grid resolution on NACA0012 self-noise prediction by large eddy simulation [Volume 10, Issue 4, 2022, Pages 389-399]
  • LCL filter Power injection of renewable energy sources using modified model predictive control [Volume 4, Issue 2, 2016, Pages 215-224]
  • Leakage Effect of a ring type barrier and rotational speed on leakage flow of gas turbine brush seal [Volume 7, Issue 4, 2019, Pages 389-399]
  • Leakage Flow Performance evaluation of trapezoidal teeth labyrinth seal [Volume 5, Issue 3, 2017, Pages 265-273]
  • LES LES/FMDF of premixed methane/air flow in a backward-facing step combustor [Volume 7, Issue 2, 2019, Pages 159-173]
  • Levelized Cost of Electricity Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage [Volume 8, Issue 3, 2020, Pages 217-235]
  • LHRM The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system [Volume 5, Issue 4, 2017, Pages 401-409]
  • Lid-Driven Cavity Combined mixed convection and radiation simulation of inclined lid driven cavity [Volume 6, Issue 3, 2018, Pages 261-277]
  • Life prediction Life span prediction for the last row blade of steam turbine [Volume 9, Issue 1, 2021, Pages 14-25]
  • Linear Brushless Permanent Magnet Motor Optimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force [Volume 5, Issue 1, 2017, Pages 1-11]
  • Linear Method The effect of the linear method on electrochemical impedance spectroscopy calculation in the time domain under the noise condition [Volume 11, Issue 1, 2023, Pages 29-42]
  • Line Losses A directional-based branches current method for transmission loss allocation in the pool-based electricity market [Volume 4, Issue 2, 2016, Pages 177-187]
  • Liquid Air Energy Storage Modeling, analyses, and assessment of a liquid air energy storage (LAES) system [Volume 9, Issue 3, 2021, Pages 249-260]
  • Liquid Paraffin Investigation with rheological behavior of liquid paraffin/Al2O3 nanofluid: Experimental approach [Volume 7, Issue 2, 2019, Pages 149-158]
  • Lithium-ion battery A modified cellular automaton model for simulating ion dynamics in a Li-ion battery electrode [Volume 10, Issue 1, 2022, Pages 41-49]
  • Local Cooling Improving the natural convective heat transfer of a rectangular heatsink using superhydrophobic walls: A numerical approach [Volume 6, Issue 3, 2018, Pages 293-303]
  • Local Unimodal Sampling Xergy analysis and multiobjective optimization of a biomass gasification-based multigeneration system [Volume 6, Issue 1, 2018, Pages 69-87]
  • Loss Allocation Transmission loss allocation in bilateral or multilateral transaction-based markets [Volume 6, Issue 1, 2018, Pages 1-6]
  • Lumped Model Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate [Volume 8, Issue 4, 2020, Pages 339-348]

M

  • Machinability Experimental investigation of the effects of cutting parameters on machinability of ECAP-processed ultrafine-grained copper using tungsten carbide cutting tools [Volume 10, Issue 3, 2022, Pages 241-254]
  • Machining Experimental investigation on the environmentally friendly turning of Al7075 using ultrasonic nozzle-minimum quantity lubrication (UN-MQL) system [Volume 11, Issue 2, 2023, Pages 193-211]
  • Magnetic Field Analysis Electromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method [Volume 5, Issue 3, 2017, Pages 227-240]
  • Magnetic Field Analysis The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system [Volume 5, Issue 4, 2017, Pages 401-409]
  • Magnetite Thermal conductivity calculation of magnetite using molecular dynamics simulation [Volume 8, Issue 1, 2020, Pages 45-54]
  • Material Design The Effect of cathode Porosity on Solid Oxide Fuel Cell Performance [Volume 3, Issue 1, 2015, Pages 25-32]
  • MATLAB Matlab simulation of solar panel MSX-64 at the best locations of Kermanshah province using GIS interpolation [Volume 4, Issue 1, 2016, Pages 21-30]
  • Maximum Power Exergoeconomic analysis and genetic algorithm power optimization of an irreversible regenerative Brayton cycle [Volume 4, Issue 2, 2016, Pages 188-203]
  • Maximum Power Point Tracking Improvement of perturb and observe method for maximum power point tracking in wind energy conversion system using fuzzy controller [Volume 4, Issue 2, 2016, Pages 111-122]
  • Mean Flow Determination of significant sources generating low-frequency noise in horizontal axis wind turbines [Volume 8, Issue 3, 2020, Pages 253-262]
  • Mean Wind Speed Development of a mathematical model to design an offshore wind and wave hybrid energy system [Volume 6, Issue 2, 2018, Pages 181-200]
  • Measurement Errors Measurements and parameters estimation in power systems containing UPFC [Volume 10, Issue 1, 2022, Pages 1-11]
  • Medical Tourism Comprehensive 3E analysis and optimization of off-grid renewable-based microgrids to meet the clinic energy demand, a case study for medical tourism [Volume 9, Issue 3, 2021, Pages 291-305]
  • Megawatt Wind Turbine Aerodynamic optimization of a 5 Megawatt wind turbine blade [Volume 4, Issue 2, 2016, Pages 133-145]
  • Methane A numerical study on the effects of hydrogen addition levels, wall thermal conductivity and inlet velocity on methane/air pre-mixed flame in a micro reactor [Volume 2, Issue 2, 2014, Pages 103-119]
  • Methane Simulation and modeling of hydrogen production from glucose biomass model compound via hydro-thermal gasification [Volume 6, Issue 2, 2018, Pages 211-219]
  • Methanol Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate [Volume 8, Issue 4, 2020, Pages 339-348]
  • Methanol Combustion and exergy investigation of a compression ignition engine fueled with ethanol and methanol blends [Volume 9, Issue 2, 2021, Pages 159-172]
  • Microchannel Numerical study of natural convection heat transfer of Al2 O3/Water nanofluid in a Γ-shaped microchannel [Volume 6, Issue 2, 2018, Pages 143-154]
  • Microgrid Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Micro Heatsink Investigation of thermal performance and entropy generation in a microchannel heatsink with a wavy channel using bio nanofluid [Volume 10, Issue 1, 2022, Pages 27-40]
  • Micro-Hydropower Plant Novel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant [Volume 5, Issue 1, 2017, Pages 43-58]
  • Microstructure The Effect of cathode Porosity on Solid Oxide Fuel Cell Performance [Volume 3, Issue 1, 2015, Pages 25-32]
  • Micro tube A numerical study on the effects of hydrogen addition levels, wall thermal conductivity and inlet velocity on methane/air pre-mixed flame in a micro reactor [Volume 2, Issue 2, 2014, Pages 103-119]
  • Microturbine Exergy , economy and pressure drop analyses for optimal design of recuperator used in microturbine [Volume 5, Issue 2, 2017, Pages 95-113]
  • Minimum Quantity Lubricant (MQL) Towards sustainable machining of 17-4 PH stainless steel using hybrid MQL-hot turning process [Volume 7, Issue 4, 2019, Pages 339-352]
  • Minimum Quantity Lubrication Experimental investigation on the environmentally friendly turning of Al7075 using ultrasonic nozzle-minimum quantity lubrication (UN-MQL) system [Volume 11, Issue 2, 2023, Pages 193-211]
  • Mixed Convection Numerical simulation of Al2O3–water nanofluid mixed convection in an inclined annulus [Volume 3, Issue 2, 2015, Pages 97-111]
  • Mixed-Integer Linear Programming, Earthquake-Prone Cities Assessment and multi-objective optimization of an off-grid solar based energy system for a Conex [Volume 9, Issue 2, 2021, Pages 127-143]
  • Mixed Integer Nonlinear Programming A mixed integer nonlinear programming model for optimizing a gas pipeline transmission linear network [Volume 6, Issue 4, 2018, Pages 351-366]
  • Mixture Working Fluid Optimization of vapor compression refrigeration cycle considering a binary mixture of working fluids using evolutionary algorithms [Volume 9, Issue 1, 2021, Pages 91-106]
  • M-OCC Cogeneration of power and hydrogen using Scramjet cooling system :Energy and exergy analyses [Volume 9, Issue 3, 2021, Pages 229-248]
  • Model-Based Predictive Control Active and reactive power control via currents of a rotor’s d and q components with nonlinear predictive control strategy in a doubly fed induction generator based on wind power system [Volume 3, Issue 2, 2015, Pages 143-157]
  • Modeling Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]
  • Modeling Energy flow modeling of broiler production in Guilan province of Iran [Volume 5, Issue 4, 2017, Pages 411-418]
  • Modeling The development and evaluation of a portable polyethylene biogas reactor [Volume 6, Issue 1, 2018, Pages 61-68]
  • Moment Coefficient Numerical simulation of incompressible turbulent flow in shrouded disk system with radial outflow [Volume 7, Issue 1, 2019, Pages 1-10]
  • Monte Carlo Economic optimization of solar systems in uncertain economic conditions using the Monte Carlo method [Volume 5, Issue 3, 2017, Pages 313-323]
  • MQL Experimental investigation of the effects of dressing and coolant-lubricant conditions on grinding of Nickel-based superalloy-Inconel 738 [Volume 9, Issue 1, 2021, Pages 27-36]
  • MRT-LBM Heat transfer and entropy generation of power-law fluids natural convection inside triangular cavity; The effect of angle and type of magnetic field applied [Volume 10, Issue 4, 2022, Pages 327-352]
  • Multi-Area Hydrothermal System Optimizing the AGC system of a three-unequal-area hydrothermal system based on evolutionary algorithms [Volume 6, Issue 1, 2018, Pages 101-116]
  • Multi-Effect Simulation and exergy evaluation of a MED unit based on waste heat recovery from a gas turbine unit [Volume 10, Issue 3, 2022, Pages 229-239]
  • Multi-Effect Desalination (MED) Design and optimization of an energy hub based on combined cycle power plant to improve economic and exergy objectives [Volume 8, Issue 1, 2020, Pages 1-22]
  • Multi-Effect Distillation Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis [Volume 5, Issue 4, 2017, Pages 419-430]
  • Multi-Expansion Cogeneration of power and hydrogen using Scramjet cooling system :Energy and exergy analyses [Volume 9, Issue 3, 2021, Pages 229-248]
  • Multigeneration A thermodynamic model for exergetic performance and optimization of a solar and biomass-fuelled multigeneration system [Volume 4, Issue 2, 2016, Pages 281-289]
  • Multi-Generation Thermodynamic diagnosis of a novel solar-biomass based multi-generation system including potable water and hydrogen production [Volume 7, Issue 1, 2019, Pages 81-98]
  • Multilateral Transaction Transmission loss allocation in bilateral or multilateral transaction-based markets [Volume 6, Issue 1, 2018, Pages 1-6]
  • Multi-objective optimization Multi-objective optimization of heat recovery steam generators [Volume 2, Issue 2, 2014, Pages 129-140]
  • Multi-objective optimization Multi-objective optimization of compression refrigeration cycle of Unit 132 South Pars refineries [Volume 4, Issue 2, 2016, Pages 147-160]
  • Multi-objective optimization Exergo-environmental and exergo-economic analyses and multi-criteria optimization of a novel solar-driven CCHP based on Kalina cycle [Volume 4, Issue 2, 2016, Pages 225-244]
  • Multi-objective optimization Exergy , economy and pressure drop analyses for optimal design of recuperator used in microturbine [Volume 5, Issue 2, 2017, Pages 95-113]
  • Multi-objective optimization Dynamical modeling and thermo-economic optimization of a cold room assisted vapor-compression refrigeration cycle [Volume 8, Issue 2, 2020, Pages 153-167]
  • Multi-objective optimization Assessment and multi-objective optimization of an off-grid solar based energy system for a Conex [Volume 9, Issue 2, 2021, Pages 127-143]
  • Multiobjective Optimization Xergy analysis and multiobjective optimization of a biomass gasification-based multigeneration system [Volume 6, Issue 1, 2018, Pages 69-87]
  • Multiple VG Heat transfer enhancement in solar air heater with turbulent natural convection by two flapping elastic winglets [Volume 9, Issue 3, 2021, Pages 209-227]
  • Multivariate Empirical Mode Decomposition (MEMD) Fault detection and isolation of wind turbine gearbox via noise-assisted multivariate empirical mode decomposition algorithm [Volume 10, Issue 3, 2022, Pages 271-286]
  • MWLS Measurements and parameters estimation in power systems containing UPFC [Volume 10, Issue 1, 2022, Pages 1-11]

N

  • Nano-Cerium Oxide The effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine [Volume 5, Issue 1, 2017, Pages 59-69]
  • Nanofluids Nanoparticle addition and path-curvature-effect on heat transfer in a typical conical spiral duct with a square cross-section [Volume 10, Issue 3, 2022, Pages 287-308]
  • Nanofluids Comparative analysis of a novel geothermal and nanofluid-based solar-driven multigeneration system integrated with high-temperature Kalina cycle: Energy, Exergy, and exergo-economics (3E) analysis [Volume 11, Issue 2, 2023, Pages 165-191]
  • Nano-Molybdenum Oxide The effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine [Volume 5, Issue 1, 2017, Pages 59-69]
  • Nanoparticle Numerical study of natural convection heat transfer of Al2 O3/Water nanofluid in a Γ-shaped microchannel [Volume 6, Issue 2, 2018, Pages 143-154]
  • Nanostructures Solar cell efficiency enhancement using a hemisphere texture containing metal nanostructures [Volume 8, Issue 2, 2020, Pages 103-110]
  • Natural convection Effect of conjugate heat transfer in designing thermoelectric beverage cooler [Volume 3, Issue 2, 2015, Pages 83-95]
  • Natural convection Improving the natural convective heat transfer of a rectangular heatsink using superhydrophobic walls: A numerical approach [Volume 6, Issue 3, 2018, Pages 293-303]
  • Natural convection Heat transfer and entropy generation of power-law fluids natural convection inside triangular cavity; The effect of angle and type of magnetic field applied [Volume 10, Issue 4, 2022, Pages 327-352]
  • Naturalgas Optimization of energy consumption and offering a procedure for cooling gas compression facilities at gas compression stations [Volume 3, Issue 2, 2015, Pages 113-124]
  • Natural Gas Transmission Network A mixed integer nonlinear programming model for optimizing a gas pipeline transmission linear network [Volume 6, Issue 4, 2018, Pages 351-366]
  • Natural SAH Heat transfer enhancement in solar air heater with turbulent natural convection by two flapping elastic winglets [Volume 9, Issue 3, 2021, Pages 209-227]
  • Natural Turbulent Convection Numerical investigation on thermal performance enhancement of a flat-plate natural flow double-pass solar air heater – The effect of the absorber plate [Volume 10, Issue 4, 2022, Pages 353-374]
  • Natural Ventilation Experimental and numerical study of natural ventilation in four-sided wind tower traps [Volume 6, Issue 2, 2018, Pages 167-179]
  • Net Energy Energy input-output analysis under different farm sizes of forage maize cultivation in the Varamin region [Volume 9, Issue 2, 2021, Pages 117-125]
  • Net Present Cost Determining the optimal size of a ground source heat pump within an air-conditioning system with economic and emission considerations [Volume 5, Issue 3, 2017, Pages 219-226]
  • Net Present Value A feasibility study and economic analysis for application of nanofluids in waste heat recovery [Volume 4, Issue 2, 2016, Pages 205-214]
  • Net Present Value Equipment capacity optimization of an educational building’s CCHP system by genetic algorithm and sensitivity analysis [Volume 5, Issue 4, 2017, Pages 375-387]
  • Network Topology A directional-based branches current method for transmission loss allocation in the pool-based electricity market [Volume 4, Issue 2, 2016, Pages 177-187]
  • Net Zero Energy Buildings Net zero energy buildings in semi-arid climates: An analysis on 3 case studies in Tehran, Iran [Volume 8, Issue 2, 2020, Pages 169-178]
  • Net-Zero Energy Buildings Green cottage power supply and floating solar power plant: A Techno-Economic analysis [Volume 10, Issue 4, 2022, Pages 375-388]
  • Neural network Experimental investigation of bubble growth and detachment in stagnant liquid column using image – based analysis [Volume 7, Issue 4, 2019, Pages 353-375]
  • Noise The effect of the linear method on electrochemical impedance spectroscopy calculation in the time domain under the noise condition [Volume 11, Issue 1, 2023, Pages 29-42]
  • Noise-Assisted MEMD Fault detection and isolation of wind turbine gearbox via noise-assisted multivariate empirical mode decomposition algorithm [Volume 10, Issue 3, 2022, Pages 271-286]
  • Nonlinear-Unbalanced Load Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Non-uniform magnetic field Heat transfer and entropy generation of power-law fluids natural convection inside triangular cavity; The effect of angle and type of magnetic field applied [Volume 10, Issue 4, 2022, Pages 327-352]
  • NOx Emission Proposal of a novel ammonia brayton cycle integrated with a methane/hydrogen brayton cycle; Thermodynamic and environmental impacts assessments [Volume 11, Issue 1, 2023, Pages 95-122]
  • NREL Phase VI Determination of significant sources generating low-frequency noise in horizontal axis wind turbines [Volume 8, Issue 3, 2020, Pages 253-262]
  • NSGA-II Techno-economic operation optimization of a HRSG in combined cycle power plants based on evolutionary algorithms: A case study of Yazd, Iran [Volume 7, Issue 1, 2019, Pages 67-79]
  • NSGA-II Optimization of vapor compression refrigeration cycle considering a binary mixture of working fluids using evolutionary algorithms [Volume 9, Issue 1, 2021, Pages 91-106]
  • Number of People Per Area Effects of supportive spaces and people on heating energy demand in cold climate in Iran [Volume 5, Issue 4, 2017, Pages 357-374]
  • Number of Teeth Performance evaluation of trapezoidal teeth labyrinth seal [Volume 5, Issue 3, 2017, Pages 265-273]
  • Numerical analysis The effect of hemispherical chevrons angle, depth, and pitch on the convective heat transfer coefficient and pressure drop in compact plate heat exchangers [Volume 4, Issue 1, 2016, Pages 31-41]
  • Numerical Heat Transfer Nanoparticle addition and path-curvature-effect on heat transfer in a typical conical spiral duct with a square cross-section [Volume 10, Issue 3, 2022, Pages 287-308]
  • Numerical modelling Simulation of gas-liquid two phase flow in upriser pipe of gas-lift systems [Volume 2, Issue 1, 2014, Pages 25-42]
  • Numerical study Investigation of thermal performance and entropy generation in a microchannel heatsink with a wavy channel using bio nanofluid [Volume 10, Issue 1, 2022, Pages 27-40]
  • Nusselt number Numerical simulation of laminar convection heat transfer from an array of circular perforated fins [Volume 5, Issue 2, 2017, Pages 147-156]

O

  • Off-Design Model Developing off-design model of Yazd integrated solar combined cycle for analyzing environmental benefits of using solar energy instead of supplementary firing [Volume 6, Issue 4, 2018, Pages 429-448]
  • Off-Grid PV System Assessment and multi-objective optimization of an off-grid solar based energy system for a Conex [Volume 9, Issue 2, 2021, Pages 127-143]
  • Offshore Wind Energy Development of a mathematical model to design an offshore wind and wave hybrid energy system [Volume 6, Issue 2, 2018, Pages 181-200]
  • Oil Company A new approach for performance evaluation of energy-related enterprises [Volume 6, Issue 1, 2018, Pages 16-26]
  • Oil & Gas A review on recent applications of brushless DC electric machines and their potential in energy saving [Volume 3, Issue 1, 2015, Pages 57-71]
  • One-Dimensional Model Combustion and exergy investigation of a compression ignition engine fueled with ethanol and methanol blends [Volume 9, Issue 2, 2021, Pages 159-172]
  • Operating Pressure Experimental values for adjusting an automatic control valve in gas pipeline transportation [Volume 6, Issue 2, 2018, Pages 221-233]
  • Optimization Aerodynamic optimal design of wind turbine blades using genetic algorithm [Volume 2, Issue 2, 2014, Pages 185-193]
  • Optimization Exergoeconomic analysis and genetic algorithm power optimization of an irreversible regenerative Brayton cycle [Volume 4, Issue 2, 2016, Pages 188-203]
  • Optimization Optimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions [Volume 4, Issue 2, 2016, Pages 271-279]
  • Optimization A thermodynamic model for exergetic performance and optimization of a solar and biomass-fuelled multigeneration system [Volume 4, Issue 2, 2016, Pages 281-289]
  • Optimization Optimization of turbine blade cooling with the aim of overall turbine performance enhancement [Volume 5, Issue 1, 2017, Pages 71-83]
  • Optimization The location optimization of wind turbine sites with using the MCDM approach: A case study [Volume 5, Issue 2, 2017, Pages 165-187]
  • Optimization 4E analysis and multi-objective optimization of gas turbine CCHP plant with variable ambient temperature [Volume 5, Issue 3, 2017, Pages 285-298]
  • Optimization Economic optimization of solar systems in uncertain economic conditions using the Monte Carlo method [Volume 5, Issue 3, 2017, Pages 313-323]
  • Optimization Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis [Volume 5, Issue 4, 2017, Pages 419-430]
  • Optimization Shape optimization of impingement and film cooling holes on a flat plate using a feedforward ANN and GA [Volume 6, Issue 3, 2018, Pages 247-259]
  • Optimization Economic optimization and comparative study of solar heat pumps [Volume 6, Issue 3, 2018, Pages 279-292]
  • Optimization Comparison of entropy generation minimization principle and entransy theory in optimal design of thermal systems [Volume 6, Issue 3, 2018, Pages 329-336]
  • Optimization A mixed integer nonlinear programming model for optimizing a gas pipeline transmission linear network [Volume 6, Issue 4, 2018, Pages 351-366]
  • Optimization Effect of impeller geometry on performance characteristics of centrifugal compressor [Volume 7, Issue 2, 2019, Pages 121-132]
  • Optimization Exergy, exergoeconomic and exergoenvironmental studies and optimization of a novel triple-evaporator refrigeration cycle with dual-nozzle ejector using low GWP refrigerants [Volume 8, Issue 1, 2020, Pages 23-44]
  • Optimization Damping sub-synchronous resonance and improving fault ride through capability: Using S.T.A.T.C.O.M. and S.D.B.R. in a wind power system [Volume 8, Issue 4, 2020, Pages 323-338]
  • Optimization Optimization and analysis of exergy, economic and environmental of gas turbine (Case study: Kerman plant combined cycle) [Volume 10, Issue 2, 2022, Pages 101-121]
  • Optimization Transient simulation and 4E Analyses of a hybrid renewable energy system for an educational building [Volume 11, Issue 2, 2023, Pages 123-144]
  • Optimum Pressure The optimum pressure for working fluid in feed water heaters of steam power plants [Volume 4, Issue 2, 2016, Pages 245-253]
  • Optimum Pressure Evaluation of the optimum pressures of gas turbines based on energy and exergy analyses [Volume 10, Issue 2, 2022, Pages 169-181]
  • ORC Enhanced performance and reduced payback period of a low grade geothermal-based ORC through employing two TEGs [Volume 7, Issue 1, 2019, Pages 23-39]
  • Organic Rankine Cycle (ORC) Theoretical analysis of a novel combined cooling, heating, and power (CCHP) cycle [Volume 5, Issue 3, 2017, Pages 241-249]
  • Organic Rankine-Vapor Compression Cycle Use of solar radiation to produce cold water for hospital air conditioning system using the combined organic Rankine-vapor compression cycle [Volume 9, Issue 1, 2021, Pages 53-69]
  • Oscillatory Wind Turbine Parametric study of a novel oscillatory wind turbine [Volume 7, Issue 4, 2019, Pages 377-387]
  • Output power Aerodynamic optimal design of wind turbine blades using genetic algorithm [Volume 2, Issue 2, 2014, Pages 185-193]
  • Output power Numerical simulation of a solar chimney power plant in the southern region of Iran [Volume 5, Issue 4, 2017, Pages 431-437]

P

  • Paddle Wheel Gas Separator The parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition [Volume 3, Issue 1, 2015, Pages 33-44]
  • Pandemic Impact of covid-19 on biofuels global market and their utilization necessity during pandemic [Volume 9, Issue 4, 2021, Pages 371-382]
  • Parabolic Dish Fabrication Fabrication and assessment of a parabolic dish con-centrator using a water heater cylindrical receiver [Volume 11, Issue 1, 2023, Pages 55-68]
  • Parabolic Trough Solar Collector The development and assessment of solar-driven Tri-generation system energy and optimization of criteria comparison [Volume 6, Issue 4, 2018, Pages 367-379]
  • Parallel Computing Improvement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials [Volume 2, Issue 2, 2014, Pages 141-154]
  • Parameter Errors Measurements and parameters estimation in power systems containing UPFC [Volume 10, Issue 1, 2022, Pages 1-11]
  • Pareto Front Xergy analysis and multiobjective optimization of a biomass gasification-based multigeneration system [Volume 6, Issue 1, 2018, Pages 69-87]
  • Particles Resuspension Numerical modeling of particles resuspension due to human stepping [Volume 10, Issue 4, 2022, Pages 401-415]
  • Particle Swarm Optimization (PSO) Optimizing the AGC system of a three-unequal-area hydrothermal system based on evolutionary algorithms [Volume 6, Issue 1, 2018, Pages 101-116]
  • Passive Heating Improvement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials [Volume 2, Issue 2, 2014, Pages 141-154]
  • Passive Method Toward the design of zero energy buildings (ZEB) in Iran: Climatic study [Volume 7, Issue 2, 2019, Pages 111-119]
  • Passive Solar Systems Energy consumption of atria; the case of a commercial-office center in the semi-arid climate of Tehran [Volume 7, Issue 3, 2019, Pages 211-234]
  • Peltier Effect Effect of conjugate heat transfer in designing thermoelectric beverage cooler [Volume 3, Issue 2, 2015, Pages 83-95]
  • PEM Thermoeconomic analysis of a hybrid PVT solar system integrated with double effect absorption chiller for cooling/hydrogen production [Volume 6, Issue 4, 2018, Pages 413-427]
  • PEM Electrolyzer Cogeneration of power and hydrogen using Scramjet cooling system :Energy and exergy analyses [Volume 9, Issue 3, 2021, Pages 229-248]
  • PEM fuel cell An analytic model of membrane humidifier for proton exchange membrane fuel cell [Volume 2, Issue 1, 2014, Pages 83-94]
  • PEM fuel cell Study of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells [Volume 6, Issue 4, 2018, Pages 393-412]
  • Perforated Fin Numerical simulation of laminar convection heat transfer from an array of circular perforated fins [Volume 5, Issue 2, 2017, Pages 147-156]
  • Performance Unsteady aerodynamic performance of Dual-Row H-Darrieus vertical axis wind turbine [Volume 8, Issue 1, 2020, Pages 55-80]
  • Performance Numerical investigation on the performance of double pass two glazed solar air heaters with jet impingement [Volume 11, Issue 1, 2023, Pages 13-28]
  • Performance analysis Numerical simulation of a solar chimney power plant in the southern region of Iran [Volume 5, Issue 4, 2017, Pages 431-437]
  • Performance Coefficient Use of solar radiation to produce cold water for hospital air conditioning system using the combined organic Rankine-vapor compression cycle [Volume 9, Issue 1, 2021, Pages 53-69]
  • Performance Simulation Energy and environmental performance of a grid-connected concentrating photovoltaic thermal system for residential buildings in Iran [Volume 9, Issue 2, 2021, Pages 173-190]
  • Performance Simulation Application of artificial neural network for prediction of energy flow in wheat production based on mechanization development approach [Volume 9, Issue 2, 2021, Pages 191-207]
  • Permanent Magnet Synchronous Generator (PMSG) Improvement of perturb and observe method for maximum power point tracking in wind energy conversion system using fuzzy controller [Volume 4, Issue 2, 2016, Pages 111-122]
  • Permanent Magnet Synchronous Machine (PMSM) Novel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant [Volume 5, Issue 1, 2017, Pages 43-58]
  • Permeability Stochastic reconstruction of carbon fiber paper gas diffusion layers of PEFCs: A comparative study [Volume 6, Issue 1, 2018, Pages 51-59]
  • Phase Change Material On the effect of using phase change materials in energy consumption and CO2 emission in buildings in Iran: a climatic and parametric study [Volume 3, Issue 2, 2015, Pages 73-81]
  • Phase Change Material Optimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions [Volume 4, Issue 2, 2016, Pages 271-279]
  • Phase change material (PCM) Numerical study on the performance of a glazed photovoltaic thermal system integrated with phase change material (GPVT/PCM): on the contribution of PCM volumetric fraction and environmental temperature [Volume 10, Issue 2, 2022, Pages 137-168]
  • Phase Change Materials (PCM) Improvement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials [Volume 2, Issue 2, 2014, Pages 141-154]
  • Photovoltaic Sensitivity analysis and parameters calculation of PV solar panel based on empirical data and two-diode circuit model [Volume 6, Issue 3, 2018, Pages 235-246]
  • Photovoltaic Scenario based technique applied to photovoltaic sources uncertainty [Volume 7, Issue 3, 2019, Pages 297-308]
  • Photovoltaic Determining the best layout of photovoltaic systems in zero energy buildings using statistical inference approach [Volume 9, Issue 2, 2021, Pages 107-116]
  • Photovoltaic Electricity Generation System Thermodynamic and economic comparison of photovoltaic electricity generation with and without self-cleaning photovoltaic panels [Volume 7, Issue 3, 2019, Pages 263-270]
  • Photovoltaic Power Plants Possibility of supplying energy to border villages by solar energy sources [Volume 9, Issue 3, 2021, Pages 279-289]
  • Photovoltaics System The assessment and experimental study of photovoltaics panel by spraying water (case study: Kerman, Iran) [Volume 8, Issue 4, 2020, Pages 389-399]
  • Photovoltaic Thermal Air Collectors Significant factors for enhancing the life cycle assessment of photovoltaic thermal air collector [Volume 7, Issue 2, 2019, Pages 175-197]
  • Piezoelectric Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
  • Piezoelectric Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations [Volume 8, Issue 1, 2020, Pages 91-102]
  • Piezoelectric Beam Development of a laboratory system to investigate and store electrical energy from the vibrations of a piezoelectric beam [Volume 4, Issue 2, 2016, Pages 161-168]
  • Piezoelectric Flexible Splitter Plate Fluid-solid interaction analysis of cantilever plate behind a fixed cylinder in parallel flow: Application to energy harvesters [Volume 11, Issue 1, 2023, Pages 43-53]
  • Pinch Analysis Thermodynamic simulation and pinch analysis of KCS11 [Volume 5, Issue 2, 2017, Pages 131-145]
  • Pinch Point Temperature Thermodynamic analysis of a novel solar water heating system during low sun radiation in Iran [Volume 6, Issue 3, 2018, Pages 317-327]
  • Pipeline Optimization of energy consumption and offering a procedure for cooling gas compression facilities at gas compression stations [Volume 3, Issue 2, 2015, Pages 113-124]
  • Planar membrane humidifier An analytic model of membrane humidifier for proton exchange membrane fuel cell [Volume 2, Issue 1, 2014, Pages 83-94]
  • Plasmonic Solar cell efficiency enhancement using a hemisphere texture containing metal nanostructures [Volume 8, Issue 2, 2020, Pages 103-110]
  • Plat Plate Collector Comparative performance assessment of flat plate and evacuated tube collectors for domestic water heating systems in Kerman, Iran [Volume 8, Issue 2, 2020, Pages 143-152]
  • Pore Size Distribution Stochastic reconstruction of carbon fiber paper gas diffusion layers of PEFCs: A comparative study [Volume 6, Issue 1, 2018, Pages 51-59]
  • Porosity Reaching the betz limit experimentally and numerically [Volume 7, Issue 3, 2019, Pages 271-278]
  • Potato Shoot Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]
  • Poultry Energy flow modeling of broiler production in Guilan province of Iran [Volume 5, Issue 4, 2017, Pages 411-418]
  • Power Curve Techno-Econo-Environmental study on the use of domestic-scale wind turbines in Iran [Volume 7, Issue 4, 2019, Pages 317-338]
  • Power Injection System (PIS) Power injection of renewable energy sources using modified model predictive control [Volume 4, Issue 2, 2016, Pages 215-224]
  • Power-law Fluids Heat transfer and entropy generation of power-law fluids natural convection inside triangular cavity; The effect of angle and type of magnetic field applied [Volume 10, Issue 4, 2022, Pages 327-352]
  • Power Management Coordinated control of hybrid AC/DC microgrids including PV and storage systems [Volume 9, Issue 4, 2021, Pages 307-316]
  • Power Sharing Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Power Sharing Simultaneous power sharing and protection against faults for DGs in microgrid with different loads [Volume 7, Issue 3, 2019, Pages 279-295]
  • Predictive Power Controller Novel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant [Volume 5, Issue 1, 2017, Pages 43-58]
  • Pressure drop Investigation of convective heat transfer, pressure drop and efficiency of ZnO/water nanofluid in alternating elliptical axis tubes [Volume 8, Issue 3, 2020, Pages 203-215]
  • Pressure drop Experimental investigation of heat transfer, pressure drop, and efficiency of TiO2/Oil nanofluid in alternating flattened tubes [Volume 10, Issue 2, 2022, Pages 123-136]
  • Pressure drop Study on heat transfer, pressure drop and efficiency of ZnO/Oil nanofluid in a novel hexagonal tube [Volume 11, Issue 2, 2023, Pages 247-259]
  • Pressure Drop Rate Experimental values for adjusting an automatic control valve in gas pipeline transportation [Volume 6, Issue 2, 2018, Pages 221-233]
  • Primary Energy Saving Equipment capacity optimization of an educational building’s CCHP system by genetic algorithm and sensitivity analysis [Volume 5, Issue 4, 2017, Pages 375-387]
  • Prime Mover Selection of the optimum prime mover and the working fluid in a regenerative organic rankine cycle [Volume 5, Issue 4, 2017, Pages 325-339]
  • Prioritizing The location optimization of wind turbine sites with using the MCDM approach: A case study [Volume 5, Issue 2, 2017, Pages 165-187]
  • Protection Method Simultaneous power sharing and protection against faults for DGs in microgrid with different loads [Volume 7, Issue 3, 2019, Pages 279-295]
  • PSO Techno-economic operation optimization of a HRSG in combined cycle power plants based on evolutionary algorithms: A case study of Yazd, Iran [Volume 7, Issue 1, 2019, Pages 67-79]
  • PTC Comparative analysis of a novel geothermal and nanofluid-based solar-driven multigeneration system integrated with high-temperature Kalina cycle: Energy, Exergy, and exergo-economics (3E) analysis [Volume 11, Issue 2, 2023, Pages 165-191]
  • Pump as Turbine Modification of pump as turbine as a soft pressure reduction systems (SPRS) for utilization in municipal water network [Volume 7, Issue 1, 2019, Pages 41-56]
  • PV Module Sensitivity analysis and parameters calculation of PV solar panel based on empirical data and two-diode circuit model [Volume 6, Issue 3, 2018, Pages 235-246]
  • PVT Thermoeconomic analysis of a hybrid PVT solar system integrated with double effect absorption chiller for cooling/hydrogen production [Volume 6, Issue 4, 2018, Pages 413-427]

Q

  • Qanat Source Heat Pump Dynamic simulation of a qanat source heat pump in different climatic conditions [Volume 10, Issue 3, 2022, Pages 309-326]

R

  • Radiation Combined mixed convection and radiation simulation of inclined lid driven cavity [Volume 6, Issue 3, 2018, Pages 261-277]
  • Radiation Interaction of laminar natural convection and radiation in an inclined square cavity containing participating gases [Volume 8, Issue 2, 2020, Pages 111-126]
  • Radiator Thermal performance enhancement of automobile radiator using water-CuO nanofluid: an experimental study [Volume 7, Issue 3, 2019, Pages 235-248]
  • Rainwater Harvesting Toward the design of zero energy buildings (ZEB) in Iran: Climatic study [Volume 7, Issue 2, 2019, Pages 111-119]
  • Rayleigh Function Analysis of prediction models for wind energy characteristics, Case study: Karaj, Iran [Volume 6, Issue 1, 2018, Pages 27-37]
  • Realization of Microstructure An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes [Volume 5, Issue 3, 2017, Pages 251-264]
  • Real-Time Electromagnetic Phenomena Calculation Distance protection closed-loop testing using RTDS [Volume 5, Issue 2, 2017, Pages 197-210]
  • Rectangular Probe Drag coefficient and strouhal number analysis of a rectangular probe in a two-phase cross flow [Volume 6, Issue 1, 2018, Pages 7-15]
  • Recuperator Analysis of micro-recuperators in small-sized gas turbines –manufacturing potential of Iran [Volume 3, Issue 1, 2015, Pages 1-12]
  • Recuperator Exergy , economy and pressure drop analyses for optimal design of recuperator used in microturbine [Volume 5, Issue 2, 2017, Pages 95-113]
  • Reduced chemistry A numerical study on the effects of hydrogen addition levels, wall thermal conductivity and inlet velocity on methane/air pre-mixed flame in a micro reactor [Volume 2, Issue 2, 2014, Pages 103-119]
  • Refrigerator Experimental comparison of internal and external condensers effect on the energy consumption of household refrigerators [Volume 10, Issue 1, 2022, Pages 13-26]
  • Regenerative Brayton Cycle Exergoeconomic analysis and genetic algorithm power optimization of an irreversible regenerative Brayton cycle [Volume 4, Issue 2, 2016, Pages 188-203]
  • Regenerative Organic Rankine Cycle Selection of the optimum prime mover and the working fluid in a regenerative organic rankine cycle [Volume 5, Issue 4, 2017, Pages 325-339]
  • Regression Matlab simulation of solar panel MSX-64 at the best locations of Kermanshah province using GIS interpolation [Volume 4, Issue 1, 2016, Pages 21-30]
  • Renewable Energy Power injection of renewable energy sources using modified model predictive control [Volume 4, Issue 2, 2016, Pages 215-224]
  • Renewable Energy Valorization of municipal solid wastes through biogas production in Iran [Volume 7, Issue 1, 2019, Pages 57-65]
  • Renewable Energy Net zero energy buildings in semi-arid climates: An analysis on 3 case studies in Tehran, Iran [Volume 8, Issue 2, 2020, Pages 169-178]
  • Renewable Energy Economic assessment of solar-based hydrogen for methanol production [Volume 8, Issue 3, 2020, Pages 263-273]
  • Renewable Energy The assessment and experimental study of photovoltaics panel by spraying water (case study: Kerman, Iran) [Volume 8, Issue 4, 2020, Pages 389-399]
  • Renewable Energy Determining the best layout of photovoltaic systems in zero energy buildings using statistical inference approach [Volume 9, Issue 2, 2021, Pages 107-116]
  • Renewable Energy Impact of covid-19 on biofuels global market and their utilization necessity during pandemic [Volume 9, Issue 4, 2021, Pages 371-382]
  • Renewable Energy Green cottage power supply and floating solar power plant: A Techno-Economic analysis [Volume 10, Issue 4, 2022, Pages 375-388]
  • Renewable Energy Transient simulation and 4E Analyses of a hybrid renewable energy system for an educational building [Volume 11, Issue 2, 2023, Pages 123-144]
  • Renewable Energy The investigation of performance and emission of a gasoline engine using novel gasoline and bio-alcohols fuel blends [Volume 11, Issue 2, 2023, Pages 145-163]
  • Requirements of EMS Proposing a quantitative approach to measure the success of energy management systems in accordance with ISO 50001: 2011 using an analytical hierarchy process (AHP) [Volume 5, Issue 4, 2017, Pages 349-355]
  • Residential Complex Sensitivity analysis and energy optimization in residential complex in warm and semi-humid climates of Iran (Dezful) [Volume 9, Issue 1, 2021, Pages 71-90]
  • Residential Heat Energy and environmental performance of a grid-connected concentrating photovoltaic thermal system for residential buildings in Iran [Volume 9, Issue 2, 2021, Pages 173-190]
  • Residential Heat Application of artificial neural network for prediction of energy flow in wheat production based on mechanization development approach [Volume 9, Issue 2, 2021, Pages 191-207]
  • Residential-Scale CCHP The use of waste heat recovery (WHR) options to produce electricity, heating, cooling, and freshwater for residential buildings [Volume 8, Issue 3, 2020, Pages 277-296]
  • Resource Conservation Valorization of municipal solid wastes through biogas production in Iran [Volume 7, Issue 1, 2019, Pages 57-65]
  • Reverse Osmosis (RO) Design and optimization of an energy hub based on combined cycle power plant to improve economic and exergy objectives [Volume 8, Issue 1, 2020, Pages 1-22]
  • Reynolds Number Numerical simulation of laminar convection heat transfer from an array of circular perforated fins [Volume 5, Issue 2, 2017, Pages 147-156]
  • Rheological Behavior Investigation with rheological behavior of liquid paraffin/Al2O3 nanofluid: Experimental approach [Volume 7, Issue 2, 2019, Pages 149-158]
  • Ring Effect of a ring type barrier and rotational speed on leakage flow of gas turbine brush seal [Volume 7, Issue 4, 2019, Pages 389-399]
  • Rotary Gas Separator The parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition [Volume 3, Issue 1, 2015, Pages 33-44]
  • Rotary & Stationary Disk Numerical simulation of incompressible turbulent flow in shrouded disk system with radial outflow [Volume 7, Issue 1, 2019, Pages 1-10]
  • Rotational Speed Effect of a ring type barrier and rotational speed on leakage flow of gas turbine brush seal [Volume 7, Issue 4, 2019, Pages 389-399]
  • Rotor Current Novel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant [Volume 5, Issue 1, 2017, Pages 43-58]
  • Roughness Effect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance [Volume 7, Issue 2, 2019, Pages 133-147]
  • Roughness Effect Simulation of fouling effects on a two-stage axial turbine performance [Volume 10, Issue 2, 2022, Pages 83-99]
  • RSC Controller Damping analysis of sub-synchronous resonance (SSR) in a wind farm based on DFIG in a series compensated network [Volume 6, Issue 4, 2018, Pages 381-392]
  • RTDS Distance protection closed-loop testing using RTDS [Volume 5, Issue 2, 2017, Pages 197-210]

S

  • Scramjet Cogeneration of power and hydrogen using Scramjet cooling system :Energy and exergy analyses [Volume 9, Issue 3, 2021, Pages 229-248]
  • S.D.B.R Damping sub-synchronous resonance and improving fault ride through capability: Using S.T.A.T.C.O.M. and S.D.B.R. in a wind power system [Volume 8, Issue 4, 2020, Pages 323-338]
  • Seal Performance evaluation of trapezoidal teeth labyrinth seal [Volume 5, Issue 3, 2017, Pages 265-273]
  • Second Law Efficiency Mini two-shaft gas turbine exergy analysis with a proposal to decrease exergy destruction [Volume 6, Issue 2, 2018, Pages 131-141]
  • Self-cleaning Thermodynamic and economic comparison of photovoltaic electricity generation with and without self-cleaning photovoltaic panels [Volume 7, Issue 3, 2019, Pages 263-270]
  • Self-Noise Effect of grid resolution on NACA0012 self-noise prediction by large eddy simulation [Volume 10, Issue 4, 2022, Pages 389-399]
  • Semi-Analytical Model A semi-analytical model for velocity profile at wind turbine wake using blade element momentum [Volume 3, Issue 1, 2015, Pages 13-24]
  • Sending and Receiving Power Transmission loss allocation in bilateral or multilateral transaction-based markets [Volume 6, Issue 1, 2018, Pages 1-6]
  • Sensitivity analysis Energy use efficiency, GHG emissions, and carbon efficiency of paddy rice production in Iran [Volume 4, Issue 2, 2016, Pages 169-176]
  • Sensitivity analysis Sensitivity analysis and energy optimization in residential complex in warm and semi-humid climates of Iran (Dezful) [Volume 9, Issue 1, 2021, Pages 71-90]
  • Shape Memory Polymer An experimental investigation on the energy storage in a shape-memory-polymer system [Volume 7, Issue 4, 2019, Pages 309-316]
  • Silicon Solar cell efficiency enhancement using a hemisphere texture containing metal nanostructures [Volume 8, Issue 2, 2020, Pages 103-110]
  • Silver nanoparticles Experimental study of nanofluid effects on heat transfer in closed cycle system in shell and tube heat exchangers at Isfahan power plant [Volume 4, Issue 2, 2016, Pages 95-109]
  • Simulation Development of a compression system dynamic simulation code for testing and designing of anti-surge control system [Volume 7, Issue 2, 2019, Pages 99-110]
  • Single-Phase Approach Comparison of convective heat transfer of turbulent nanofluid flow through helical and conical coiled tubes [Volume 7, Issue 1, 2019, Pages 11-22]
  • Site specific Aerodynamic design and economical evaluation of site specific horizontal axis wind turbine (HAWT) [Volume 2, Issue 1, 2014, Pages 43-56]
  • Skylight Parametric study of skylight design parameters to improve the indoor visual quality in exhibition areas [Volume 11, Issue 1, 2023, Pages 1-11]
  • SLHPS Thermodynamic analysis of a novel solar water heating system during low sun radiation in Iran [Volume 6, Issue 3, 2018, Pages 317-327]
  • Sliding Mode Observer On the development of a sliding mode observer-based fault diagnosis scheme for a wind turbine benchmark model [Volume 5, Issue 1, 2017, Pages 13-26]
  • Slip Length Improving the natural convective heat transfer of a rectangular heatsink using superhydrophobic walls: A numerical approach [Volume 6, Issue 3, 2018, Pages 293-303]
  • Small-Scale Gas-to-Liquid Technology Economic feasibility of small-scale gas to liquid technology in reducing flaring in Iran and case study of implementing the technology at the third South Pars refinery [Volume 9, Issue 4, 2021, Pages 317-330]
  • Smart Rotor Simulation of an airfoil with a deformable flap applicable in wind turbine structural load reduction [Volume 8, Issue 3, 2020, Pages 297-306]
  • SOFC Thermodynamic evaluation of a SOFC-based hybrid system integrated with HDH desalination unit [Volume 10, Issue 4, 2022, Pages 439-457]
  • Solar Adsorption Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate [Volume 8, Issue 4, 2020, Pages 339-348]
  • Solar Analyzer Function Possibility of supplying energy to border villages by solar energy sources [Volume 9, Issue 3, 2021, Pages 279-289]
  • Solar-Based Hydrogen Economic assessment of solar-based hydrogen for methanol production [Volume 8, Issue 3, 2020, Pages 263-273]
  • Solar Cells Solar cell efficiency enhancement using a hemisphere texture containing metal nanostructures [Volume 8, Issue 2, 2020, Pages 103-110]
  • Solar chimney Improvement of thermal performance of a solar chimney based on a passive solar heating system with phase-change materials [Volume 2, Issue 2, 2014, Pages 141-154]
  • Solar Chimney Power Plant Numerical simulation of a solar chimney power plant in the southern region of Iran [Volume 5, Issue 4, 2017, Pages 431-437]
  • Solar Collector Theoretical and experimental investigation into incident radiation on solar conical collector [Volume 4, Issue 2, 2016, Pages 123-132]
  • Solar Concentrator Fabrication and assessment of a parabolic dish con-centrator using a water heater cylindrical receiver [Volume 11, Issue 1, 2023, Pages 55-68]
  • Solar Domestic Hot Water System Optimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions [Volume 4, Issue 2, 2016, Pages 271-279]
  • Solar Dryer Design and optimization of solar-assisted conveyer-belt dryer for biomass [Volume 5, Issue 2, 2017, Pages 85-94]
  • Solar Energy A thermodynamic model for exergetic performance and optimization of a solar and biomass-fuelled multigeneration system [Volume 4, Issue 2, 2016, Pages 281-289]
  • Solar Energy Design and optimization of solar-assisted conveyer-belt dryer for biomass [Volume 5, Issue 2, 2017, Pages 85-94]
  • Solar Energy The energy and exergy analysis of a novel cogeneration organic Rankine power and two-stage compression refrigeration cycle [Volume 5, Issue 3, 2017, Pages 299-312]
  • Solar Energy Economic optimization of solar systems in uncertain economic conditions using the Monte Carlo method [Volume 5, Issue 3, 2017, Pages 313-323]
  • Solar Energy Sensitivity analysis and parameters calculation of PV solar panel based on empirical data and two-diode circuit model [Volume 6, Issue 3, 2018, Pages 235-246]
  • Solar Energy The development and assessment of solar-driven Tri-generation system energy and optimization of criteria comparison [Volume 6, Issue 4, 2018, Pages 367-379]
  • Solar Energy Developing off-design model of Yazd integrated solar combined cycle for analyzing environmental benefits of using solar energy instead of supplementary firing [Volume 6, Issue 4, 2018, Pages 429-448]
  • Solar Energy Significant factors for enhancing the life cycle assessment of photovoltaic thermal air collector [Volume 7, Issue 2, 2019, Pages 175-197]
  • Solar Energy The assessment and experimental study of photovoltaics panel by spraying water (case study: Kerman, Iran) [Volume 8, Issue 4, 2020, Pages 389-399]
  • Solar Energy Possibility of supplying energy to border villages by solar energy sources [Volume 9, Issue 3, 2021, Pages 279-289]
  • Solar Energy Comprehensive 3E analysis and optimization of off-grid renewable-based microgrids to meet the clinic energy demand, a case study for medical tourism [Volume 9, Issue 3, 2021, Pages 291-305]
  • Solar Energy Energy, exergy and environmental analyses of a trigeneration system with power generation units of solid oxide fuel cell and solar panels [Volume 10, Issue 4, 2022, Pages 417-437]
  • Solar Energy Fabrication and assessment of a parabolic dish con-centrator using a water heater cylindrical receiver [Volume 11, Issue 1, 2023, Pages 55-68]
  • Solar Heating Economic optimization and comparative study of solar heat pumps [Volume 6, Issue 3, 2018, Pages 279-292]
  • Solar Heat Pump Economic optimization and comparative study of solar heat pumps [Volume 6, Issue 3, 2018, Pages 279-292]
  • Solar panel Msx-64 Matlab simulation of solar panel MSX-64 at the best locations of Kermanshah province using GIS interpolation [Volume 4, Issue 1, 2016, Pages 21-30]
  • Solar radiation Use of solar radiation to produce cold water for hospital air conditioning system using the combined organic Rankine-vapor compression cycle [Volume 9, Issue 1, 2021, Pages 53-69]
  • Solar Water Heater Comparative performance assessment of flat plate and evacuated tube collectors for domestic water heating systems in Kerman, Iran [Volume 8, Issue 2, 2020, Pages 143-152]
  • Solar Water Heating System Thermodynamic analysis of a novel solar water heating system during low sun radiation in Iran [Volume 6, Issue 3, 2018, Pages 317-327]
  • Solid oxide fuel cell Evaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity [Volume 4, Issue 1, 2016, Pages 11-19]
  • Solid oxide fuel cell Energy, exergy and environmental analyses of a trigeneration system with power generation units of solid oxide fuel cell and solar panels [Volume 10, Issue 4, 2022, Pages 417-437]
  • Solid Oxide Fuel Cells An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes [Volume 5, Issue 3, 2017, Pages 251-264]
  • South of Iran Numerical simulation of a solar chimney power plant in the southern region of Iran [Volume 5, Issue 4, 2017, Pages 431-437]
  • Space Heating Numerical investigation on thermal performance enhancement of a flat-plate natural flow double-pass solar air heater – The effect of the absorber plate [Volume 10, Issue 4, 2022, Pages 353-374]
  • Spatial Daylight Autonomy (sDA) Parametric study of skylight design parameters to improve the indoor visual quality in exhibition areas [Volume 11, Issue 1, 2023, Pages 1-11]
  • SPD Experimental investigation of the effects of cutting parameters on machinability of ECAP-processed ultrafine-grained copper using tungsten carbide cutting tools [Volume 10, Issue 3, 2022, Pages 241-254]
  • Square Pulsation Film cooling simulation on an entire gas turbine blade with square pulsed coolant injection [Volume 8, Issue 4, 2020, Pages 367-388]
  • SR Motor Electromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method [Volume 5, Issue 3, 2017, Pages 227-240]
  • SSR Damping analysis of sub-synchronous resonance (SSR) in a wind farm based on DFIG in a series compensated network [Volume 6, Issue 4, 2018, Pages 381-392]
  • Stagger Angle Effect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance [Volume 7, Issue 2, 2019, Pages 133-147]
  • Start-up Logic The required power of the MGT-40 gas turbine starter [Volume 3, Issue 2, 2015, Pages 137-142]
  • Start-up Power The required power of the MGT-40 gas turbine starter [Volume 3, Issue 2, 2015, Pages 137-142]
  • S.T.A.T.C.O.M Damping sub-synchronous resonance and improving fault ride through capability: Using S.T.A.T.C.O.M. and S.D.B.R. in a wind power system [Volume 8, Issue 4, 2020, Pages 323-338]
  • State Estimation Measurements and parameters estimation in power systems containing UPFC [Volume 10, Issue 1, 2022, Pages 1-11]
  • Static Synchronous Compensator Improving the performance of wind turbine equipped with DFIG using STATCOM based on input-output feedback linearization controller [Volume 4, Issue 1, 2016, Pages 65-79]
  • Statistical Inference Determining the best layout of photovoltaic systems in zero energy buildings using statistical inference approach [Volume 9, Issue 2, 2021, Pages 107-116]
  • Stator and Rotor Blades Simulation of fouling effects on a two-stage axial turbine performance [Volume 10, Issue 2, 2022, Pages 83-99]
  • Steam Power Plant Investigation of a single-reheat condensing steam power plant based on energy and exergy analysis [Volume 2, Issue 2, 2014, Pages 155-170]
  • Steam Power Plant The optimum pressure for working fluid in feed water heaters of steam power plants [Volume 4, Issue 2, 2016, Pages 245-253]
  • Step A numerical study on the effects of hydrogen addition levels, wall thermal conductivity and inlet velocity on methane/air pre-mixed flame in a micro reactor [Volume 2, Issue 2, 2014, Pages 103-119]
  • Stochastic Scenario based technique applied to photovoltaic sources uncertainty [Volume 7, Issue 3, 2019, Pages 297-308]
  • Storage Modeling, analyses, and assessment of a liquid air energy storage (LAES) system [Volume 9, Issue 3, 2021, Pages 249-260]
  • Stratification Optimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions [Volume 4, Issue 2, 2016, Pages 271-279]
  • Strouhal Number Drag coefficient and strouhal number analysis of a rectangular probe in a two-phase cross flow [Volume 6, Issue 1, 2018, Pages 7-15]
  • Sub-Synchronous Resonance Damping sub-synchronous resonance and improving fault ride through capability: Using S.T.A.T.C.O.M. and S.D.B.R. in a wind power system [Volume 8, Issue 4, 2020, Pages 323-338]
  • Super-critical CO2 Conceptual design of a super-critical CO2 brayton cycle based on stack waste heat recovery for shazand power plant in Iran [Volume 2, Issue 1, 2014, Pages 95-101]
  • Supercritical Water Simulation and modeling of hydrogen production from glucose biomass model compound via hydro-thermal gasification [Volume 6, Issue 2, 2018, Pages 211-219]
  • Superhydrophobic Improving the natural convective heat transfer of a rectangular heatsink using superhydrophobic walls: A numerical approach [Volume 6, Issue 3, 2018, Pages 293-303]
  • Supplementary Firing Developing off-design model of Yazd integrated solar combined cycle for analyzing environmental benefits of using solar energy instead of supplementary firing [Volume 6, Issue 4, 2018, Pages 429-448]
  • Supportive Space Effects of supportive spaces and people on heating energy demand in cold climate in Iran [Volume 5, Issue 4, 2017, Pages 357-374]
  • Surface quality Experimental investigation of the effects of dressing and coolant-lubricant conditions on grinding of Nickel-based superalloy-Inconel 738 [Volume 9, Issue 1, 2021, Pages 27-36]
  • Surface quality Experimental investigation of the effect of single point dressing parameters on grinding of Mo40 hardened steel using mounted point grinding tool [Volume 10, Issue 2, 2022, Pages 197-214]
  • Surface roughness Towards sustainable machining of 17-4 PH stainless steel using hybrid MQL-hot turning process [Volume 7, Issue 4, 2019, Pages 339-352]
  • Surface roughness Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel [Volume 9, Issue 2, 2021, Pages 145-158]
  • Surface roughness Experimental investigation of the effects of cutting parameters on machinability of ECAP-processed ultrafine-grained copper using tungsten carbide cutting tools [Volume 10, Issue 3, 2022, Pages 241-254]
  • Surface roughness Experimental investigation on the environmentally friendly turning of Al7075 using ultrasonic nozzle-minimum quantity lubrication (UN-MQL) system [Volume 11, Issue 2, 2023, Pages 193-211]
  • Surrogate Model Power optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model [Volume 8, Issue 1, 2020, Pages 81-90]
  • Surrogate Model Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations [Volume 8, Issue 1, 2020, Pages 91-102]
  • Sustainability Investigating carbon emission abatement long-term plan with the aim of energy system modeling; case study of Iran [Volume 6, Issue 4, 2018, Pages 337-349]
  • Sustainable development The food-energy-water nexus: A framework for sustainable development modeling [Volume 8, Issue 2, 2020, Pages 179-201]
  • Sustainable Grinding Experimental investigation of the effects of dressing and coolant-lubricant conditions on grinding of Nickel-based superalloy-Inconel 738 [Volume 9, Issue 1, 2021, Pages 27-36]
  • Symmetric Fault Simultaneous power sharing and protection against faults for DGs in microgrid with different loads [Volume 7, Issue 3, 2019, Pages 279-295]

T

  • Task Prioritization Identification and assessment of training needs for employees of wind farms [Volume 5, Issue 2, 2017, Pages 189-196]
  • Teaching-Learning-Based Optimization (TLBO) Optimizing the AGC system of a three-unequal-area hydrothermal system based on evolutionary algorithms [Volume 6, Issue 1, 2018, Pages 101-116]
  • Tea Industry Enhancers of the energy efficiency in tea processing industry [Volume 6, Issue 2, 2018, Pages 201-209]
  • Technical Innovation The food-energy-water nexus: A framework for sustainable development modeling [Volume 8, Issue 2, 2020, Pages 179-201]
  • Techno-Economic Analysis Techno-economic operation optimization of a HRSG in combined cycle power plants based on evolutionary algorithms: A case study of Yazd, Iran [Volume 7, Issue 1, 2019, Pages 67-79]
  • Temperature Simulation and modeling of hydrogen production from glucose biomass model compound via hydro-thermal gasification [Volume 6, Issue 2, 2018, Pages 211-219]
  • Temperature Jump Numerical study of natural convection heat transfer of Al2 O3/Water nanofluid in a Γ-shaped microchannel [Volume 6, Issue 2, 2018, Pages 143-154]
  • Tension Life span prediction for the last row blade of steam turbine [Volume 9, Issue 1, 2021, Pages 14-25]
  • The Axial Turbine Simulation of fouling effects on a two-stage axial turbine performance [Volume 10, Issue 2, 2022, Pages 83-99]
  • Theoretical Investigation Theoretical and experimental investigation into incident radiation on solar conical collector [Volume 4, Issue 2, 2016, Pages 123-132]
  • Thermal and Electrical Efficiencies Numerical study on the performance of a glazed photovoltaic thermal system integrated with phase change material (GPVT/PCM): on the contribution of PCM volumetric fraction and environmental temperature [Volume 10, Issue 2, 2022, Pages 137-168]
  • Thermal comfort Design of a new hybrid windcatcher and ground source heat pump system [Volume 10, Issue 1, 2022, Pages 51-71]
  • Thermal conductivity Thermal conductivity calculation of magnetite using molecular dynamics simulation [Volume 8, Issue 1, 2020, Pages 45-54]
  • Thermal Energy Storage Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer [Volume 5, Issue 4, 2017, Pages 341-348]
  • Thermal Energy Storage Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage [Volume 8, Issue 3, 2020, Pages 217-235]
  • Thermal Expansion An experimental investigation on the energy storage in a shape-memory-polymer system [Volume 7, Issue 4, 2019, Pages 309-316]
  • Thermal Oil Boiler Study on performance and methods to optimize thermal oil boiler efficiency in cement industry [Volume 4, Issue 1, 2016, Pages 53-64]
  • Thermal Performance Study of thermal performance of building roofs in the city of Tehran [Volume 6, Issue 3, 2018, Pages 305-315]
  • Thermal Performance An overview on the thermal performance of dual-tube heat exchangers in the presence of nanofluids [Volume 11, Issue 1, 2023, Pages 69-94]
  • Thermal Resistance Comparison of entropy generation minimization principle and entransy theory in optimal design of thermal systems [Volume 6, Issue 3, 2018, Pages 329-336]
  • Thermochromic Window Simulation-based optimization of smart windows performance using coupled EnergyPlus - NSGA-II - ANP method [Volume 9, Issue 1, 2021, Pages 1-13]
  • Thermodynamic and Economic Analysis Thermodynamic and economic comparison of photovoltaic electricity generation with and without self-cleaning photovoltaic panels [Volume 7, Issue 3, 2019, Pages 263-270]
  • Thermodynamic Equilibrium Model Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]
  • Thermoeconomic Multi-objective optimization of heat recovery steam generators [Volume 2, Issue 2, 2014, Pages 129-140]
  • Thermoeconomic Thermoeconomic optimization and exergy analysis of transcritical CO2 refrigeration cycle with an ejector [Volume 4, Issue 1, 2016, Pages 43-52]
  • Thermoeconomic analysis Thermoeconomic comparison between the performance of small-scale internal combustion engines and gas turbines integrated with a biomass gasifier [Volume 2, Issue 1, 2014, Pages 57-82]
  • Thermoelectric Effect of conjugate heat transfer in designing thermoelectric beverage cooler [Volume 3, Issue 2, 2015, Pages 83-95]
  • Thermoelectric Beverage Cooler Effect of conjugate heat transfer in designing thermoelectric beverage cooler [Volume 3, Issue 2, 2015, Pages 83-95]
  • Thermoelectric Cup Effect of conjugate heat transfer in designing thermoelectric beverage cooler [Volume 3, Issue 2, 2015, Pages 83-95]
  • Thermoelectric Generator Enhanced performance and reduced payback period of a low grade geothermal-based ORC through employing two TEGs [Volume 7, Issue 1, 2019, Pages 23-39]
  • Thermo-Fluid Simulation Thermo-fluid simulation of the gas turbine performance based on the first law of thermodynamics [Volume 7, Issue 1, 2019, Pages 99-108]
  • Three- Stage Data Envelopment Analysis (DEA) A new approach for performance evaluation of energy-related enterprises [Volume 6, Issue 1, 2018, Pages 16-26]
  • Time Domain The effect of the linear method on electrochemical impedance spectroscopy calculation in the time domain under the noise condition [Volume 11, Issue 1, 2023, Pages 29-42]
  • Tool Wear Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel [Volume 9, Issue 2, 2021, Pages 145-158]
  • TOPSIS and LINMAP Decision-Making Multi-objective optimization of compression refrigeration cycle of Unit 132 South Pars refineries [Volume 4, Issue 2, 2016, Pages 147-160]
  • Torque-Speed Diagram The required power of the MGT-40 gas turbine starter [Volume 3, Issue 2, 2015, Pages 137-142]
  • Torsional Interaction (TI) Damping analysis of sub-synchronous resonance (SSR) in a wind farm based on DFIG in a series compensated network [Volume 6, Issue 4, 2018, Pages 381-392]
  • Tortuosity Evaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity [Volume 4, Issue 1, 2016, Pages 11-19]
  • Tortuosity Stochastic reconstruction of carbon fiber paper gas diffusion layers of PEFCs: A comparative study [Volume 6, Issue 1, 2018, Pages 51-59]
  • Total Annual Cost Selection of the optimum prime mover and the working fluid in a regenerative organic rankine cycle [Volume 5, Issue 4, 2017, Pages 325-339]
  • Total Annual Cost Dynamical modeling and thermo-economic optimization of a cold room assisted vapor-compression refrigeration cycle [Volume 8, Issue 2, 2020, Pages 153-167]
  • Total Annual Cost Optimization of vapor compression refrigeration cycle considering a binary mixture of working fluids using evolutionary algorithms [Volume 9, Issue 1, 2021, Pages 91-106]
  • Total Annual Cost (TAC) Design and optimization of an energy hub based on combined cycle power plant to improve economic and exergy objectives [Volume 8, Issue 1, 2020, Pages 1-22]
  • Total NPC Techno-Econo-Environmental study on the use of domestic-scale wind turbines in Iran [Volume 7, Issue 4, 2019, Pages 317-338]
  • Trailing-Edge Flap Simulation of an airfoil with a deformable flap applicable in wind turbine structural load reduction [Volume 8, Issue 3, 2020, Pages 297-306]
  • Train Carriages Effect of Fire Location on the Smoke Temperature and CO Distributions in a Subway Tunnel with Train Carriages: A Numerical Study [Volume 11, Issue 2, 2023, Pages 231-246]
  • Training Courses Identification and assessment of training needs for employees of wind farms [Volume 5, Issue 2, 2017, Pages 189-196]
  • Training Need Assessment Identification and assessment of training needs for employees of wind farms [Volume 5, Issue 2, 2017, Pages 189-196]
  • Transcritical CO2 Thermoeconomic optimization and exergy analysis of transcritical CO2 refrigeration cycle with an ejector [Volume 4, Issue 1, 2016, Pages 43-52]
  • Transient Enclosure Voltage Analysis of effective factors on transient ground potential rise in gas insulated substations [Volume 3, Issue 2, 2015, Pages 125-136]
  • Transient Ground Potential Rise (TGPR) Analysis of effective factors on transient ground potential rise in gas insulated substations [Volume 3, Issue 2, 2015, Pages 125-136]
  • Transition State Improving the performance of wind turbine equipped with DFIG using STATCOM based on input-output feedback linearization controller [Volume 4, Issue 1, 2016, Pages 65-79]
  • Transmission Loss Allocation A directional-based branches current method for transmission loss allocation in the pool-based electricity market [Volume 4, Issue 2, 2016, Pages 177-187]
  • Transonic Axial Compressor Effect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance [Volume 7, Issue 2, 2019, Pages 133-147]
  • Trapezoidal Performance evaluation of trapezoidal teeth labyrinth seal [Volume 5, Issue 3, 2017, Pages 265-273]
  • Trapped Vortex Combustor Large eddy simulation of propane combustion in a planar trapped vortex combustor [Volume 8, Issue 2, 2020, Pages 127-141]
  • Triangular Cavity Heat transfer and entropy generation of power-law fluids natural convection inside triangular cavity; The effect of angle and type of magnetic field applied [Volume 10, Issue 4, 2022, Pages 327-352]
  • Trigeneration The development and assessment of solar-driven Tri-generation system energy and optimization of criteria comparison [Volume 6, Issue 4, 2018, Pages 367-379]
  • Trigeneration Energy, exergy and environmental analyses of a trigeneration system with power generation units of solid oxide fuel cell and solar panels [Volume 10, Issue 4, 2022, Pages 417-437]
  • Triple-Evaporator Exergy, exergoeconomic and exergoenvironmental studies and optimization of a novel triple-evaporator refrigeration cycle with dual-nozzle ejector using low GWP refrigerants [Volume 8, Issue 1, 2020, Pages 23-44]
  • TRNSYS Design and operation optimization of an air conditioning system through simulation: an hour-by-hour simulation study [Volume 6, Issue 2, 2018, Pages 155-165]
  • TRNSYS Economic optimization and comparative study of solar heat pumps [Volume 6, Issue 3, 2018, Pages 279-292]
  • TRNSYS Dynamic simulation of a qanat source heat pump in different climatic conditions [Volume 10, Issue 3, 2022, Pages 309-326]
  • Turbine Pressure Drop Numerical simulation of a solar chimney power plant in the southern region of Iran [Volume 5, Issue 4, 2017, Pages 431-437]
  • Turbo Compressor A mixed integer nonlinear programming model for optimizing a gas pipeline transmission linear network [Volume 6, Issue 4, 2018, Pages 351-366]
  • Turbulent Comparison of convective heat transfer of turbulent nanofluid flow through helical and conical coiled tubes [Volume 7, Issue 1, 2019, Pages 11-22]
  • Turbulent flow Numerical simulation of turbulent flow around the dtmb4119 propeller in open water conditions [Volume 6, Issue 1, 2018, Pages 39-49]
  • Turbulent flow Heat transfer enhancement in solar air heater with turbulent natural convection by two flapping elastic winglets [Volume 9, Issue 3, 2021, Pages 209-227]
  • Turbulent flow Numerical investigation on the performance of double pass two glazed solar air heaters with jet impingement [Volume 11, Issue 1, 2023, Pages 13-28]
  • Turbulent Reacting Flow LES/FMDF of premixed methane/air flow in a backward-facing step combustor [Volume 7, Issue 2, 2019, Pages 159-173]
  • Twist Effect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance [Volume 7, Issue 2, 2019, Pages 133-147]
  • Two-Diode Circuit Model Sensitivity analysis and parameters calculation of PV solar panel based on empirical data and two-diode circuit model [Volume 6, Issue 3, 2018, Pages 235-246]
  • Two-Phase Cross Flow Drag coefficient and strouhal number analysis of a rectangular probe in a two-phase cross flow [Volume 6, Issue 1, 2018, Pages 7-15]
  • Two phase flow Simulation of gas-liquid two phase flow in upriser pipe of gas-lift systems [Volume 2, Issue 1, 2014, Pages 25-42]

U

  • UFG Experimental investigation of the effects of cutting parameters on machinability of ECAP-processed ultrafine-grained copper using tungsten carbide cutting tools [Volume 10, Issue 3, 2022, Pages 241-254]
  • Ultracapacitor Review, analysis and simulation of different structures for hybrid electrical energy storages [Volume 5, Issue 2, 2017, Pages 115-129]
  • Ultrasonic Nozzle Experimental investigation on the environmentally friendly turning of Al7075 using ultrasonic nozzle-minimum quantity lubrication (UN-MQL) system [Volume 11, Issue 2, 2023, Pages 193-211]
  • Uncertainty Scenario based technique applied to photovoltaic sources uncertainty [Volume 7, Issue 3, 2019, Pages 297-308]
  • UPFC Measurements and parameters estimation in power systems containing UPFC [Volume 10, Issue 1, 2022, Pages 1-11]
  • Useful Daylight Illuminance (UDI) Parametric study of skylight design parameters to improve the indoor visual quality in exhibition areas [Volume 11, Issue 1, 2023, Pages 1-11]

V

  • Validation ANFIS modeling and validation of a variable speed wind turbine based on actual data [Volume 7, Issue 3, 2019, Pages 249-262]
  • Variable Aspect Ratio Heat transfer and entropy generation of power-law fluids natural convection inside triangular cavity; The effect of angle and type of magnetic field applied [Volume 10, Issue 4, 2022, Pages 327-352]
  • Velocity Slip Numerical study of natural convection heat transfer of Al2 O3/Water nanofluid in a Γ-shaped microchannel [Volume 6, Issue 2, 2018, Pages 143-154]
  • Very Fast Transient (VFT) Analysis of effective factors on transient ground potential rise in gas insulated substations [Volume 3, Issue 2, 2015, Pages 125-136]
  • Vibration Development of a laboratory system to investigate and store electrical energy from the vibrations of a piezoelectric beam [Volume 4, Issue 2, 2016, Pages 161-168]
  • Vibration Signals Signature Fault detection and isolation of wind turbine gearbox via noise-assisted multivariate empirical mode decomposition algorithm [Volume 10, Issue 3, 2022, Pages 271-286]
  • Villages Possibility of supplying energy to border villages by solar energy sources [Volume 9, Issue 3, 2021, Pages 279-289]
  • Virtual Impedance Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Voltage Source Inverter (VSI) Power injection of renewable energy sources using modified model predictive control [Volume 4, Issue 2, 2016, Pages 215-224]
  • Volume of fluid Simulation of gas-liquid two phase flow in upriser pipe of gas-lift systems [Volume 2, Issue 1, 2014, Pages 25-42]
  • Volumetric Fraction Numerical study on the performance of a glazed photovoltaic thermal system integrated with phase change material (GPVT/PCM): on the contribution of PCM volumetric fraction and environmental temperature [Volume 10, Issue 2, 2022, Pages 137-168]
  • Vortex Gas Separator The parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition [Volume 3, Issue 1, 2015, Pages 33-44]
  • Vortex-Induced Vibration Fluid-solid interaction analysis of cantilever plate behind a fixed cylinder in parallel flow: Application to energy harvesters [Volume 11, Issue 1, 2023, Pages 43-53]

W

  • Waste heat recovery Conceptual design of a super-critical CO2 brayton cycle based on stack waste heat recovery for shazand power plant in Iran [Volume 2, Issue 1, 2014, Pages 95-101]
  • Water-CuO Nanofluid Thermal performance enhancement of automobile radiator using water-CuO nanofluid: an experimental study [Volume 7, Issue 3, 2019, Pages 235-248]
  • Water Reservoir Theoretical analysis of reservoir-based floating photovoltaic plant for 15-khordad dam in Delijan [Volume 5, Issue 2, 2017, Pages 211-218]
  • Wave Energy Development of a mathematical model to design an offshore wind and wave hybrid energy system [Volume 6, Issue 2, 2018, Pages 181-200]
  • Wavy Channel Investigation of thermal performance and entropy generation in a microchannel heatsink with a wavy channel using bio nanofluid [Volume 10, Issue 1, 2022, Pages 27-40]
  • Weibull Function Wind resource assessment of Khuzestan province in Iran [Volume 4, Issue 2, 2016, Pages 81-94]
  • Weibull Function Analysis of prediction models for wind energy characteristics, Case study: Karaj, Iran [Volume 6, Issue 1, 2018, Pages 27-37]
  • Wet Compression Thermo-fluid simulation of the gas turbine performance based on the first law of thermodynamics [Volume 7, Issue 1, 2019, Pages 99-108]
  • Wheel Loading Experimental investigation of the effect of single point dressing parameters on grinding of Mo40 hardened steel using mounted point grinding tool [Volume 10, Issue 2, 2022, Pages 197-214]
  • Windcatcher’s Efficiency Design of a new hybrid windcatcher and ground source heat pump system [Volume 10, Issue 1, 2022, Pages 51-71]
  • Wind Energy Active and reactive power control via currents of a rotor’s d and q components with nonlinear predictive control strategy in a doubly fed induction generator based on wind power system [Volume 3, Issue 2, 2015, Pages 143-157]
  • Wind Energy Wind resource assessment of Khuzestan province in Iran [Volume 4, Issue 2, 2016, Pages 81-94]
  • Wind Energy Identification and assessment of training needs for employees of wind farms [Volume 5, Issue 2, 2017, Pages 189-196]
  • Wind Energy Analysis of prediction models for wind energy characteristics, Case study: Karaj, Iran [Volume 6, Issue 1, 2018, Pages 27-37]
  • Wind Energy Comprehensive 3E analysis and optimization of off-grid renewable-based microgrids to meet the clinic energy demand, a case study for medical tourism [Volume 9, Issue 3, 2021, Pages 291-305]
  • Wind Farm Improving the performance of wind turbine equipped with DFIG using STATCOM based on input-output feedback linearization controller [Volume 4, Issue 1, 2016, Pages 65-79]
  • Wind Farm The location optimization of wind turbine sites with using the MCDM approach: A case study [Volume 5, Issue 2, 2017, Pages 165-187]
  • Wind Farm Identification and assessment of training needs for employees of wind farms [Volume 5, Issue 2, 2017, Pages 189-196]
  • Wind Farm Analysis and simulation of dynamic performance for DFIG-based wind farm connected to a distrubition system [Volume 6, Issue 2, 2018, Pages 117-130]
  • Wind Power Analysis of prediction models for wind energy characteristics, Case study: Karaj, Iran [Volume 6, Issue 1, 2018, Pages 27-37]
  • Wind Power Density Development of a mathematical model to design an offshore wind and wave hybrid energy system [Volume 6, Issue 2, 2018, Pages 181-200]
  • Wind roses Wind resource assessment of Khuzestan province in Iran [Volume 4, Issue 2, 2016, Pages 81-94]
  • Wind Speed Wind resource assessment of Khuzestan province in Iran [Volume 4, Issue 2, 2016, Pages 81-94]
  • Wind Tower Experimental and numerical study of natural ventilation in four-sided wind tower traps [Volume 6, Issue 2, 2018, Pages 167-179]
  • Wind Tunnel Experimental and numerical study of natural ventilation in four-sided wind tower traps [Volume 6, Issue 2, 2018, Pages 167-179]
  • Wind Turbine A review on fatigue design of heavy section EN-GJS-400-18-LT ductile iron wind turbine castings [Volume 2, Issue 1, 2014, Pages 5-24]
  • Wind Turbine A robust engineering approach for wind turbine blade profile aeroelastic computation [Volume 2, Issue 2, 2014, Pages 121-128]
  • Wind Turbine Numerical aeroelastic analysis of wind turbine NREL Phase VI Rotor [Volume 3, Issue 1, 2015, Pages 45-56]
  • Wind Turbine Wind resource assessment of Khuzestan province in Iran [Volume 4, Issue 2, 2016, Pages 81-94]
  • Wind Turbine On the development of a sliding mode observer-based fault diagnosis scheme for a wind turbine benchmark model [Volume 5, Issue 1, 2017, Pages 13-26]
  • Wind Turbine ANFIS modeling and validation of a variable speed wind turbine based on actual data [Volume 7, Issue 3, 2019, Pages 249-262]
  • Wind Turbine Reaching the betz limit experimentally and numerically [Volume 7, Issue 3, 2019, Pages 271-278]
  • Wind Turbine Determination of significant sources generating low-frequency noise in horizontal axis wind turbines [Volume 8, Issue 3, 2020, Pages 253-262]
  • Wind Turbine Simulation of an airfoil with a deformable flap applicable in wind turbine structural load reduction [Volume 8, Issue 3, 2020, Pages 297-306]
  • Wind Turbine Convolutional neural networks for wind turbine gearbox health monitoring [Volume 10, Issue 1, 2022, Pages 73-82]
  • Wind Turbine Airfoil Performance improvement of a wind turbine blade using a developed inverse design method [Volume 4, Issue 1, 2016, Pages 1-10]
  • Wind turbine blade Aerodynamic optimal design of wind turbine blades using genetic algorithm [Volume 2, Issue 2, 2014, Pages 185-193]
  • Wind Turbine Gearbox Fault detection and isolation of wind turbine gearbox via noise-assisted multivariate empirical mode decomposition algorithm [Volume 10, Issue 3, 2022, Pages 271-286]
  • Wind Turbine Wake A semi-analytical model for velocity profile at wind turbine wake using blade element momentum [Volume 3, Issue 1, 2015, Pages 13-24]
  • Working Fluid Theoretical analysis of a novel combined cooling, heating, and power (CCHP) cycle [Volume 5, Issue 3, 2017, Pages 241-249]
  • Working Fluid Selection of the optimum prime mover and the working fluid in a regenerative organic rankine cycle [Volume 5, Issue 4, 2017, Pages 325-339]
  • Working Fluid Dynamical modeling and thermo-economic optimization of a cold room assisted vapor-compression refrigeration cycle [Volume 8, Issue 2, 2020, Pages 153-167]

Z

  • Zero Energy Building Determining the best layout of photovoltaic systems in zero energy buildings using statistical inference approach [Volume 9, Issue 2, 2021, Pages 107-116]
  • Zero Energy Building (ZEB) Toward the design of zero energy buildings (ZEB) in Iran: Climatic study [Volume 7, Issue 2, 2019, Pages 111-119]
  • Zigzag Channel Study of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells [Volume 6, Issue 4, 2018, Pages 393-412]